A Gazetteer for the United States and Canada
Census Data for Oakdale ...
The most recent Census Estimate<1> was for 2017 and it gave Oakdale a population of 297 people.
The last Decennial Census<2> was in 2010, which gave Oakdale a population of 322 people.
The village of Oakdale is located in Antelope County. The 2010 Census gave Antelope County a population of 6,685 people. This means that Oakdale had 4.82% of the county's total population, making it Antelope's 5th most populous community.
When the Census Bureau conducts a census for a village like Oakdale, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the village.
Things like the population, area and housing for Oakdale reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Oakdale might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Oakdale has a total area of 0.52 square miles [1.3 km²].
Antelope County has a land area of 857 square miles [2,220.2 km²]. At 0.52 square miles [1.3 km²], Oakdale has 0.06% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 42° 4' 12" (or 42.07°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (322 people) and land area (0.52 square miles [1.3 km²]) values from the 2010 Census, Oakdale had a population density of 619 people per square mile [239.1 people/km²].
In comparison, the 2000 Census shows Oakdale had a population of 345 people and a land area of 0.52 square miles [1.3 km²]. This gives a population density of 664 people per square mile [256.5 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Oakdale. You need to be careful when making such a comparison, the differences are likely to lead to an apple-to-oranges comparison. More information about the nature of these changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Oakdale had 160 Housing Units<3> and with its population of 322 people, this averages 2.01 people per Housing Unit.
The 2010 Census shows Oakdale had a land area of 0.52 square miles [1.3 km²]. This translates to 307.7 Housing Units per square mile [118.8 housing units/km²].
From the Census of 2000: Oakdale had 163 Housing Units, a population of 345 people and a land area of 0.52 square miles [1.3 km²]. This gives a density of 2.12 people per Housing Unit and 313.9 Housing Units per square mile [121.2 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Oakdale and you need to be careful when comparing results between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Antelope County ...
The community of Oakdale is located in Antelope County.
The county had a population of 6,685 people at the 2010 Census. With it's population of 322 people, Oakdale represented 4.82% of the county's total.
In addition, where the village of Oakdale has a population density of 619 people per square mile [239.1 people/km²], Antelope County averages 7.8 people per square mile [3.01 people/km²].
For more information, please visit our Census Page for Antelope County.
Population Rings for Oakdale ...
To help identify the number of people who live in Oakdale and the surrounding area, we have drawn concentric rings centered on Oakdale. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Oakdale, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Oakdale. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.
The 2010 Census shows that the total area for Oakdale was 0.52 square miles [1.3 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 0.52 square miles [1.3 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Oakdale, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Oakdale.
For the 2010 Census, the location was given as:
Lat: 42.070084° (or 42°4'12" N) [Map]
For the 2000 Census, the location given was:
Lat: 42.069966° (or 42°4'11" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 147.7 feet to the east<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2399541) to Oakdale. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Oakdale. The GNIS point has been mapped to the latitude/longitude:
Lat: 42.070084° (or 42°4'12" N) [Map]
The GSP location given for the 2010 Census lies 0.78 feet to the south<6> of the point given by the GNIS for Oakdale. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Oakdale.
Miscellaneous Information for Oakdale ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Antelope County or the village of Oakdale:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Oakdale:
GNIS ID for Oakdale: 2399541
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 31 (Nebraska)
County Code: 003 (Antelope County)
Place Code: 35385 (Oakdale)
Misc. Census Codes ...
Oakdale is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Oakdale.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Oakdale. If you can help, please contact us through our Feedback Page.
The official website for Antelope County: www.co.antelope.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 11 Mar 2019