A Gazetteer for the United States and Canada
Morse Bluff, Nebraska
Census Data for Morse Bluff ...
The most recent Census Estimate<1> was for 2017 and it gave Morse Bluff a population of 137 people.
The last Decennial Census<2> was in 2010, which gave Morse Bluff a population of 135 people.
The village of Morse Bluff is located in Saunders County. The 2010 Census gave Saunders County a population of 20,780 people. This means that Morse Bluff had 0.65% of the county's total population, making it Saunders' 11th most populous community.
At the same time, Nebraska had a population of 1,826,341 people.
When the Census Bureau conducts a census for a village like Morse Bluff, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the village.
Things like the population, area and housing for Morse Bluff reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Morse Bluff might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Morse Bluff has a total area of 0.18 square miles [0.5 km²].
Saunders County has a land area of 750 square miles [1,943.1 km²]. At 0.18 square miles [0.5 km²], Morse Bluff has 0.02% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 41° 25' 51" (or 41.43°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (135 people) and land area (0.18 square miles [0.5 km²]) values from the 2010 Census, Morse Bluff had a population density of 762 people per square mile [294.5 people/km²].
In comparison, the 2000 Census shows Morse Bluff had a population of 134 people and a land area of 0.18 square miles [0.5 km²]. This gives a population density of 746 people per square mile [288.2 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Morse Bluff. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about the changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Morse Bluff had 60 Housing Units<3> and with its population of 135 people, this averages 2.25 people per Housing Unit.
The 2010 Census shows Morse Bluff had a land area of 0.18 square miles [0.5 km²]. This translates to 339 Housing Units per square mile [130.9 housing units/km²].
From the Census of 2000: Morse Bluff had 59 Housing Units, a population of 134 people and a land area of 0.18 square miles [0.5 km²]. This gives a density of 2.27 people per Housing Unit and 328.6 Housing Units per square mile [126.9 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Morse Bluff and you need to be careful when comparing between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
Saunders County ...
The community of Morse Bluff is located in Saunders County.
The county had a population of 20,780 people at the 2010 Census. With it's population of 135 people, Morse Bluff represented 0.65% of the county's total.
In addition, where the village of Morse Bluff has a population density of 762 people per square mile [294.5 people/km²], Saunders County averages 27.7 people per square mile [10.69 people/km²].
For more information, please visit our Census Page for Saunders County.
Population Rings for Morse Bluff ...
To help identify the number of people who live in Morse Bluff and the surrounding area, we have drawn concentric rings centered on Morse Bluff. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Morse Bluff, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Morse Bluff. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 1.41% smaller than the 2000 Census.
The 2010 Census shows that the total area for Morse Bluff was 0.18 square miles [0.5 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 0.18 square miles [0.5 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Morse Bluff, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Morse Bluff.
For the 2010 Census, the location was given as:
Lat: 41.430946° (or 41°25'51" N) [Map]
For the 2000 Census, the location given was:
Lat: 41.432033° (or 41°25'55" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 421.2 feet to the south<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2399401) to Morse Bluff. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Morse Bluff. The GNIS point has been mapped to the latitude/longitude:
Lat: 41.430946° (or 41°25'51" N) [Map]
The GSP location given for the 2010 Census lies 0.78 feet to the south<6> of the point given by the GNIS for Morse Bluff. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Morse Bluff.
Miscellaneous Information for Morse Bluff ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Saunders County or the village of Morse Bluff:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Morse Bluff:
GNIS ID for Morse Bluff: 2399401
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 31 (Nebraska)
County Code: 155 (Saunders County)
Place Code: 32865 (Morse Bluff)
Misc. Census Codes ...
Morse Bluff is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Morse Bluff.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Morse Bluff. If you can help, please contact us through our Feedback Page.
The official website for Saunders County: www.co.saunders.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 11 Mar 2019