A Gazetteer for the United States and Canada

Monroe, Nebraska

Nearby Census Genealogy
Cemeteries Tidbits &
Other NE

The location of Monroe

Census Data for Monroe ...

Population ...

The most recent Census Estimate<1> was for 2017 and it gave Monroe a population of 286 people.

The last Decennial Census<2> was in 2010, which gave Monroe a population of 284 people.

The village of Monroe is located in Platte County. The 2010 Census gave Platte County a population of 32,237 people. This means that Monroe had 0.88% of the county's total population, making it Platte's 5th most populous community.

At the same time, Nebraska had a population of 1,826,341 people, meaning that Monroe had 0.02% of the total population of Nebraska - making it the state's 286th most populous community.

Area ...

When the Census Bureau conducts a census for a village like Monroe, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the village.

Things like the population, area and housing for Monroe reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Monroe might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.

The 2010 Census shows that the sampling area for Monroe has a total area of 0.17 square miles [0.5 km²].

Platte County has a land area of 674 square miles [1,745.8 km²]. At 0.17 square miles [0.5 km²], Monroe has 0.03% of the county's total land area.

Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:

Lat:   41° 28' 26"   (or 41.47°)             [Map]

Lon:   -97° 35' 59"   (or -97.6°)

More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Population Density ...

Using the population (284 people) and land area (0.17 square miles [0.5 km²]) values from the 2010 Census, Monroe had a population density of 1,632 people per square mile [630 people/km²].

In comparison, the 2000 Census shows Monroe had a population of 307 people and a land area of 0.18 square miles [0.5 km²]. This gives a population density of 1,753 people per square mile [677 people/km²]

NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Monroe. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Monroe had 128 Housing Units<3> and with its population of 284 people, this averages 2.22 people per Housing Unit.

The 2010 Census shows Monroe had a land area of 0.17 square miles [0.5 km²]. This translates to 735 Housing Units per square mile [284 housing units/km²].

From the Census of 2000: Monroe had 125 Housing Units, a population of 307 people and a land area of 0.18 square miles [0.5 km²]. This gives a density of 2.46 people per Housing Unit and 714 Housing Units per square mile [275.7 housing units/km²].

NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Monroe and you need to be careful when comparing numbers between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).

Platte County ...

The community of Monroe is located in Platte County.

The county had a population of 32,237 people at the 2010 Census. With it's population of 284 people, Monroe represented 0.88% of the county's total.

In addition, where the village of Monroe has a population density of 1,632 people per square mile [630 people/km²], Platte County averages 47.83 people per square mile [18.47 people/km²].

For more information, please visit our Census Page for Platte County.

Population Rings for Monroe ...

To help identify the number of people who live in Monroe and the surrounding area, we have drawn concentric rings centered on Monroe. We counted the number of communities within each ring and summed their populations.<4>

  Radius   No of
  Since 2010    
5 mi   [8 km]1286+0.7%
10 mi   [16 km]51,986-1.68%
15 mi   [24 km]1027,000+3.87%
20 mi   [32 km]1730,792+3.09%
25 mi   [40 km]2537,868+2.03%
30 mi   [48 km]3348,432+1.28%

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Monroe, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Monroe. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Area ...

The sampling area (or polygon) given for the 2010 Census is 0.6% smaller than the 2000 Census.

The 2010 Census shows that the total area for Monroe was 0.17 square miles [0.5 km²]. Of this total, only a minor amount of the area is covered by water.

The 2000 Census shows a total area of 0.18 square miles [0.5 km²]. Of this total, only a minor amount of the area is covered by water.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Monroe, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Monroe.

For the 2010 Census, the location was given as:

Lat:   41.474040°   (or 41°28'26" N)             [Map]

Lon:   -97.599914°   (or -97°35'59" W)

For the 2000 Census, the location given was:

Lat:   41.474662°   (or 41°28'28" N)             [Map]

Lon:   -97.600431°   (or -97°36'1" W)

The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 267.2 feet to the southeast<5> of the location that was used in the 2000 Census.

The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2399383) to Monroe. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Monroe. The GNIS point has been mapped to the latitude/longitude:

Lat:   41.474040°   (or 41°28'26" N)             [Map]

Lon:   -97.599913°   (or -97°35'59" W)

The GSP location given for the 2010 Census lies 0.78 feet to the south<6> of the point given by the GNIS for Monroe. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Monroe.

Miscellaneous Information for Monroe ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Platte County or the village of Monroe:

The GNIS Codes ...

The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Monroe:

GNIS ID for Monroe: 2399383

GNIS ID for Platte County: 835892

GNIS ID for Nebraska: 1779792

The FIPS Codes ...

An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):

State Code: 31 (Nebraska)

County Code: 141 (Platte County)

Place Code: 32585 (Monroe)

State & County Code: 31/141 (Nebraska / Platte County)

State & Place Code: 31/32585 (Nebraska / Monroe)

Misc. Census Codes ...

Monroe is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Monroe.

Other Roadside Stops ...

Visit our Community Index for Nebraska

About Platte County

About Nebraska

Off-the-Road Links ...

The official website of the U.S. Census Bureau

Unfortunately, we don't know of a website for Monroe. If you can help, please contact us through our Feedback Page.

The official website for Platte County:

The official website for State of Nebraska:

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2017.

- Return to Citation

<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.

- Return to Citation

<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).

- Return to Citation

<4>The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.

- Return to Citation

<5>The calculated bearing (or angle) to the 2010 Census location is 211 degrees and a distance of 267.2 feet.

- Return to Citation

<6>The calculated bearing (or angle) to the GNIS point is 159 degrees and a distance of 0.78 feet.

- Return to Citation






Sitemap Privacy
of Use



Copyright 2019
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 11 Mar 2019