RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Madison County >> Walnut >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Walnut in the Atlas, the following communities of the 1890's would have been found near the current location of Walnut. The following communities are listed based on their distance, with the one closest to Walnut listed first.

  • Barnard
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Barnard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barnard
    • Barnard is located in Madison County
  • Sandy Bottom
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for Sandy Bottom have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Bottom
    • Sandy Bottom is located in Madison County
  • Stackhouse
    (2 miles [3.2 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Stackhouse. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Stackhouse
    • Stackhouse is located in Madison County
    • Google driving directions:
    • From your current location to Stackhouse
    • From Walnut to Stackhouse
  • Marshall
    (4 miles [6.4 km] to the southeast)
  • Big Pine
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Big Pine have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Big Pine
    • Big Pine is located in Madison County
  • Rollins
    (5 miles [8 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Rollins. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Rollins
    • Rollins is located in Madison County
    • Google driving directions:
    • From your current location to Rollins
    • From Walnut to Rollins
  • Hot Springs
    (5 miles [8 km] to the northwest)
  • Big Laurel
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Big Laurel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Big Laurel
    • Big Laurel is located in Madison County
  • Bluff
    (6 miles [9.7 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Bluff
    • Bluff is located in Madison County
    • Google driving directions:
    • From your current location to Bluff
    • From Walnut to Bluff
  • Spring Creek
    (7 miles [11.3 km] to the southwest)
  • White Rock
    (7 miles [11.3 km] to the north)
  • Lynch ‑ Historic
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Lynch have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lynch
    • Lynch is located in Madison County
  • Canto
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Canto have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canto
    • Canto is located in Buncombe County
  • Jupiter
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jupiter have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jupiter
    • Jupiter is located in Buncombe County
  • Mars Hill
    (10 miles [16.1 km] to the east)
  • Allegheny
    (10 miles [16.1 km] to the north)
  • Paint Rock
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Paint Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Paint Rock
    • Paint Rock is located in Madison County
  • Alexander
    (11 miles [17.7 km] to the southeast)
  • Little Creek
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Little Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Creek
    • Little Creek is located in Madison County
  • Sandymush
    (12 miles [19.3 km] to the south)
  • Stocksville
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Stocksville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stocksville
    • Stocksville is located in Buncombe County
  • Flat Creek
    (12 miles [19.3 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Flat Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Flat Creek
    • Flat Creek is located in Buncombe County
    • Google driving directions:
    • From your current location to Flat Creek
    • From Walnut to Flat Creek
  • Ivy
    (12 miles [19.3 km] to the east)
  • Wolf Creek
    (12 miles [19.3 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Wolf Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Wolf Creek
    • Wolf Creek is located in Cocke County (TN)
    • Google driving directions:
    • From your current location to Wolf Creek
    • From Walnut to Wolf Creek
  • Leicester
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Leicester have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leicester
    • Leicester is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Leicester <4>
  • Limestone Springs
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Limestone Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Limestone Springs
    • Limestone Springs is located in Greene County (TN)
  • Jonestown ‑ Historic
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jonestown
    • Jonestown is located in Cocke County (TN)

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Walnut, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025