RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Anson County >> Wadesboro >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Wadesboro. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Wadesboro.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Wadesboro - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 25 communities listed:

  • Albemarle
    (27 miles [43.5 km] to the north)
  • Badin
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Badin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Badin
    • Badin is located in Stanly County
    • Population from the 2020 Census: 1,934 people
    • Jump to TripAdvisor's Tourism page for Badin <2>
  • Candor
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Candor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Candor
    • Candor is located in Montgomery County
    • Population from the 2020 Census: 817 people
    • Jump to TripAdvisor's Tourism page for Candor <2>
  • Cheraw
    (21 miles [33.8 km] to the southeast)
    • Jump to our Gazetteer entry for Cheraw
    • Cheraw is located in Chesterfield County (SC)
    • Population from the 2020 Census: 5,554 people
    • Jump to TripAdvisor's Tourism page for Cheraw <2>
  • Chesterfield
    (15 miles [24.1 km] to the south)
  • Ellerbe
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ellerbe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellerbe
    • Ellerbe is located in Richmond County
    • Population from the 2020 Census: 968 people
    • Jump to TripAdvisor's Tourism page for Ellerbe <2>
  • Gibson
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gibson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibson
    • Gibson is located in Scotland County
    • Population from the 2020 Census: 497 people
    • Jump to TripAdvisor's Tourism page for Gibson <2>
  • Hamlet
    (22 miles [35.4 km] to the east)
  • Jefferson
    (27 miles [43.5 km] to the southwest)
    • Jump to our Gazetteer entry for Jefferson
    • Jefferson is located in Chesterfield County (SC)
    • Population from the 2020 Census: 704 people
    • Jump to TripAdvisor's Tourism page for Jefferson <2>
  • Lilesville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Lilesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lilesville
    • Lilesville is located in Anson County
    • Population from the 2020 Census: 482 people
    • Jump to TripAdvisor's Tourism page for Lilesville <2>
  • Locust
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust
    • Locust is located in Stanly County
    • Population from the 2020 Census: 3,270 people
    • Jump to TripAdvisor's Tourism page for Locust <2>
  • Marshville
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marshville
    • Marshville is located in Union County
    • Population from the 2020 Census: 2,835 people
    • Jump to TripAdvisor's Tourism page for Marshville <2>
  • Monroe
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe
    • Monroe is located in Union County
    • Population from the 2020 Census: 35,668 people
    • Jump to TripAdvisor's Tourism page for Monroe <2>
  • Mount Croghan
    (16 miles [25.7 km] to the southwest)
  • Norwood
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norwood
    • Norwood is located in Stanly County
    • Population from the 2020 Census: 2,469 people
    • Jump to TripAdvisor's Tourism page for Norwood <2>
  • Oakboro
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakboro
    • Oakboro is located in Stanly County
    • Population from the 2020 Census: 1,928 people
    • Jump to TripAdvisor's Tourism page for Oakboro <2>
  • Pageland
    (22 miles [35.4 km] to the southwest)
    • Jump to our Gazetteer entry for Pageland
    • Pageland is located in Chesterfield County (SC)
    • Population from the 2020 Census: 2,535 people
    • Jump to TripAdvisor's Tourism page for Pageland <2>
  • Patrick
    (26 miles [41.8 km] to the south)
    • Jump to our Gazetteer entry for Patrick
    • Patrick is located in Chesterfield County (SC)
    • Population from the 2020 Census: 329 people
    • Jump to TripAdvisor's Tourism page for Patrick <2>
  • Peachland
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peachland
    • Peachland is located in Anson County
    • Population from the 2020 Census: 402 people
    • Jump to TripAdvisor's Tourism page for Peachland <2>
  • Rockingham
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Rockingham have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockingham
    • Rockingham is located in Richmond County
    • Population from the 2020 Census: 8,520 people
    • Jump to TripAdvisor's Tourism page for Rockingham <2>
  • Ruby
    (16 miles [25.7 km] to the south)
    • Jump to our Gazetteer entry for Ruby
    • Ruby is located in Chesterfield County (SC)
    • Population from the 2020 Census: 334 people
    • Jump to TripAdvisor's Tourism page for Ruby <2>
  • Stanfield
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stanfield
    • Stanfield is located in Stanly County
    • Population from the 2020 Census: 1,552 people
    • Jump to TripAdvisor's Tourism page for Stanfield <2>
  • Troy
    (28 miles [45.1 km] to the north)
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Montgomery County
    • Population from the 2020 Census: 3,293 people
    • Jump to TripAdvisor's Tourism page for Troy <2>
  • Wallace
    (21 miles [33.8 km] to the southeast)
  • Wingate
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Wingate have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wingate
    • Wingate is located in Union County
    • Population from the 2020 Census: 4,724 people
    • Jump to TripAdvisor's Tourism page for Wingate <2>

The official website for Wadesboro: www.cityofwadesboro.org/

The official website for Anson County: www.co.anson.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Wadesboro) to Point B.Our distance measurements begin at a specific point in Wadesboro. The point we use is located at these GPS coordinates - Latitude: 34.9663, Longitude: -80.0769    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024