Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Vanceboro had a population of 372 people in 1895 with a post office and no railroad service. In 2020, Vanceboro had a population of 955 people.
The following communities are listed based on their distance from Vanceboro, with the one closest to Vanceboro listed first.
- Ernul
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Ernul have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ernul
- Ernul is located in Craven County
- Jasper
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Jasper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jasper
- Jasper is located in Craven County
- Lima
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lima. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lima
- Lima is located in Craven County
- Maplecypress
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Maplecypress have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maplecypress
- Maplecypress is located in Craven County
- Bellair
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Bellair have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellair
- Bellair is located in Craven County
- Calico
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Calico. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Calico
- Calico is located in Pitt County
- Tuscarora
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tuscarora. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tuscarora
- Tuscarora is located in Craven County
- Clark
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Clark. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clark
- Clark is located in Craven County
- Fort Barnwell
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Fort Barnwell
- Fort Barnwell is located in Craven County
- Blounts Creek
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Blounts Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blounts Creek
- Blounts Creek is located in Beaufort County
- Cove City
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Cove City
- Cove City is located in Craven County
- Population from the 2020 Census: 387 people
- Chicod
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Chicod have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chicod
- Chicod is located in Pitt County
- Coxville
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Coxville
- Coxville is located in Pitt County
- Johnsons Mills ‑ Historic
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Johnsons Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnsons Mills
- Johnsons Mills is located in Pitt County
- Black Jack
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Black Jack have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Black Jack
- Black Jack is located in Pitt County
- Gilead
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Gilead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilead
- Gilead is located in Beaufort County
- Chocowinity
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Chocowinity have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chocowinity
- Chocowinity is located in Beaufort County
- Population from the 2020 Census: 770 people
- Jump to TripAdvisor's Tourism page for Chocowinity <4>
- New Bern
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for New Bern have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bern
- New Bern is located in Craven County
- Population from the 2020 Census: 29,940 people
- Jump to TripAdvisor's Tourism page for New Bern <4>
- Olympia
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Olympia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olympia
- Olympia is located in Pamlico County
- Dover
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Dover
- Dover is located in Craven County
- Population from the 2020 Census: 384 people
- James City
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for James City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for James City
- James City is located in Craven County
- Grifton
(16 miles [25.7 km] to the west)
- Washington
(17 miles [27.4 km] to the north)
- Redallia
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Redallia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redallia
- Redallia is located in Pitt County
- Littlefield
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Littlefield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Littlefield
- Littlefield is located in Pitt County
- Closs
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Closs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Closs
- Closs is located in Lenoir County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Vanceboro. If you can help, please contact us through our Feedback Page.
The official website for Craven County: www.co.craven.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Vanceboro, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |