Welcome to Tolar Landing ...
Tolar Landing is located in Bladen County<1>.
A typical abbreviation for Tolar Landing: Tolar Lndg. (or less commonly used: Tolar Lndng.)
Tolar Landing is 30 feet [9 m] above sea level.<2>.
Time Zone: Tolar Landing lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Tolar Landing: 910 & 472<3>
Communities near Tolar Landing ...
We have created a list of 10 communities that are near Tolar Landing.
- Fayetteville
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Fayetteville
- Fayetteville is located in Cumberland County
- Population from the 2020 Census: 211,705 people
- Jump to TripAdvisor's Tourism page for Fayetteville <4>
- Lumberton
(17 miles [27.4 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <4>
- Hope Mills
(11 miles [17.7 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <4>
- Eastover
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Eastover
- Eastover is located in Cumberland County
- Estimated population in 2015: 3,677 people
- Elizabethtown
(18 miles [29 km] to the southeast)- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <4>
- Saint Pauls
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <4>
- Roseboro
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Roseboro
- Roseboro is located in Sampson County
- Population from the 2020 Census: 1,183 people
- Jump to TripAdvisor's Tourism page for Roseboro <4>
- Stedman
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Stedman
- Stedman is located in Cumberland County
- Population from the 2020 Census: 1,082 people
- Jump to TripAdvisor's Tourism page for Stedman <4>
- Parkton
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <4>
- Rennert
(14 miles [22.5 km] to the west)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Tolar Landing. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Tolar Landing.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Tolar Landing. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Tolar Landing.
We also have a detailed list of newspapers that have been published in the area around Tolar Landing. See our Newspapers Page for Tolar Landing.
TripAdvisor Tourism Pages for Tolar Landing ...
Looking for more information about Tolar Landing? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Tolar Landing, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Tolar Landing.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Tolar Landing. If you can help, please contact us through our Feedback Page.
The official website for Bladen County: www.bladeninfo.net/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | If you're interested in how the shape of North Carolina's counties, including Bladen, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Tolar Landing - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 910 code has been Overlayed with the 472 area code. New phone numbers in the Tolar Landing area will be assigned with one of these codes: 910 or 472. As a result, placing a call in the Tolar Landing area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <6> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |