Census Data for Taylors Corner
Although we found mention of Taylors Corner during our research, we have little information about it.<1> Over time, we expect to discover additional information that will be added to our Gazetteer..
As far as we can tell, Taylors Corner<2> has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Taylors Corner, you might be interested in some nearby communities where we do:
- Richlands
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richlands
- Richlands is located in Onslow County
- Jump to TripAdvisor's Tourism page for Richlands <4>
- Pink Hill
(9 miles [14.5 km] to the west)- Note: The GPS coordinates that we are using for Pink Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pink Hill
- Pink Hill is located in Lenoir County
- Jump to TripAdvisor's Tourism page for Pink Hill <4>
- Beulaville
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Beulaville
- Beulaville is located in Duplin County
- Jump to TripAdvisor's Tourism page for Beulaville <4>
- Trenton
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Trenton
- Trenton is located in Jones County
- Jump to TripAdvisor's Tourism page for Trenton <4>
- Dover
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for Dover
- Dover is located in Craven County
- Kinston
(18 miles [29 km] to the north)- Note: The GPS coordinates that we are using for Kinston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kinston
- Kinston is located in Lenoir County
- Jump to TripAdvisor's Tourism page for Kinston <4>
- Cove City
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Cove City
- Cove City is located in Craven County
- Jacksonville
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Onslow County
- Jump to TripAdvisor's Tourism page for Jacksonville <4>
- Pollocksville
(20 miles [32.2 km] to the east)- Jump to our Gazetteer entry for Pollocksville
- Pollocksville is located in Jones County
- Jump to TripAdvisor's Tourism page for Pollocksville <4>
- Seven Springs
(20 miles [32.2 km] to the northwest)- Jump to our Gazetteer entry for Seven Springs
- Seven Springs is located in Wayne County
- Jump to TripAdvisor's Tourism page for Seven Springs <4>
- Kenansville
(21 miles [33.8 km] to the west)- Note: The GPS coordinates that we are using for Kenansville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenansville
- Kenansville is located in Duplin County
- Jump to TripAdvisor's Tourism page for Kenansville <4>
- Maysville
(21 miles [33.8 km] to the east)- Note: The GPS coordinates that we are using for Maysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maysville
- Maysville is located in Jones County
- Jump to TripAdvisor's Tourism page for Maysville <4>
- Continue List (360 more) ...
- Greenevers
(22 miles [35.4 km] to the southwest)- Note: The GPS coordinates that we are using for Greenevers have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenevers
- Greenevers is located in Duplin County
- La Grange
(23 miles [37 km] to the northwest)- Note: The GPS coordinates that we are using for La Grange have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for La Grange
- La Grange is located in Lenoir County
- Jump to TripAdvisor's Tourism page for La Grange <4>
- River Bend
(25 miles [40.2 km] to the east)- Note: The GPS coordinates that we are using for River Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for River Bend
- River Bend is located in Craven County
- Greenevers
Jones County ...
Taylors Corner is located in Jones County<5>.
For more information, please visit our Census Page for Jones County.
Miscellaneous Information for Taylors Corner ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Jones County or the community of Taylors Corner:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 37 (North Carolina)
- County Code: 103 (Jones County)
- Place Code: 66900 (Taylors Corner)
- State & County Code: 37/103 (North Carolina / Jones County)
- State & Place Code: 37/66900 (North Carolina / Taylors Corner)
- Misc. Census Codes ...
- Taylors Corner is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Taylors Corner.
Off-the-Road Links ...
The official website for Jones County: www.co.jones.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer. For example, we might find a sentence like "He went north past Taylors Corner and then turned east". While Taylors Corner could be some kind of landmark, we think that it's more likely to be a community. We've added Taylors Corner as a placeholder with the hope that we'll be able to add more information in the future. Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Mile's to see Pete ... Mile's is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name. Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time. Also keep in mind that Taylors Corner could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out. Since confusion between counties is common, we searched and weren't able to find another North Carolina community named Taylors Corner. |
| <2> | It's a common practice for mapmakers to remove the apostrophe from possessive names. So Taylors Corner may originally have been Taylor's Corner. Sometimes the trailing 's' might be dropped altogether, in which case Taylors Corner might be written as Taylor Corner. For more information, please visit our Genealogy Helper Page for Taylors Corner. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | If you're interested in how the shape of North Carolina's counties, including Jones, have changed over time, we recommend the Atlas of Historical County Boundaries. |