Miscellaneous Information

Various Identification Codes ...

GNIS Codes ...

The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, establish a name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).

The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).

A unique and permanent numeric identifier has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:

GNIS ID for Misenheimer: 2407503

GNIS ID for Stanly County: 1025844

GNIS ID for North Carolina: 1027616

FIPS Codes ...

In a past effort, various federal agencies created a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.

The following FIPS codes apply to Misenheimer:

Place (Community) Code:	43580
State Code:	37 (North Carolina)
County Code:	167 (Stanly County)

Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:

State/Place Code:	37/43580
State/County Code:	37/167

As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:

	FIPS Code	translates to	GNIS Code
State of North Carolina:	37		1027616
Stanly County:	37/167		1025844
Misenheimer:	37/43580		2407503

GPS Location - GNIS vs Census ...

An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of Misenheimer, it is a point within Misenheimer that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.

For Misenheimer, the GNIS GPS location is given as:

Lat:   35° 28' 53"   (or 35.48°)

Lon:   -80° 17' 12"   (or -80.29°)  

Determined by its statistical needs, the Census Bureau has defined a sampling area for Misenheimer - this area also contains a map point. As with the GNIS code, the location of the Census point should be considered as being arbitrary within the sampling area.

For Misenheimer, the Census 2010 GPS location is given as:

Lat:   35° 28' 38"   (or 35.48°)

Lon:   -80° 17' 9"   (or -80.29°)  

The map point defined by the Census Bureau lies 1,509 feet to the south<1> of the point given by the GNIS (see above).

Regional Codes ...

For statistical purposes, the US Census Bureau has divided the country into four Regions. Misenheimer is located in Region #3 (the South Region).

In turn, the US Census Bureau has further divided each Region into Divisions. Misenheimer is located in Division #5 (the South Atlantic Division).

The Office of Management and Budget (OMB) has created ten Federal Regions. Misenheimer is located in Region IV (Region 4).

The Federal Emergency Management Agency (FEMA) has created ten Management Regions. Misenheimer is located in Region IV (Region 4).

Referenced GNIS Records ...

GNIS ID #990077   (Name of Record: Misenheimer)

Class: populated place

A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.

A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.

County: Stanly

Map Name: Richfield

Lat: 35.4848625       Lon: -80.2883904  

Elev: 204 ft.

GNIS ID #2407503   (Name of Record: Village of Misenheimer)

Class: civil

A political division formed for administrative purposes (such as a borough, county, incorporated place, parish, town or township).

A 'civil' record may have a corresponding 'census' or 'populated place' record. The information contained in the 'civil' record applies only to the class and should not be confused with either the 'census' and 'populated place' classes.

County: Stanly

Map Name: Richfield

Lat: 35.4814532       Lon: -80.286702  

Elev: 202 ft.

Referenced FIPS Records ...

FIPS Code: 37/43580   (Place Name: Misenheimer (RR name Misenheimer Springs))

County: Stanly     (FIPS State/County: 37/167)

Class: U6

Identifies a populated place (ie- Misenheimer) that is wholly or substantially located outside the boundaries of any incorporated place or CDP (Census Designated Place) that has an authoritative common name recognized by the U.S. Geological Survey (USGS).

GSA Code: 3084

Off-the-Road Links ...

Unfortunately, we don't know of a website for Misenheimer. If you can help, please contact us through our Feedback Page.

The official website for Stanly County: www.co.stanly.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

The official website of the U.S. Census Bureau

The official website of the U.S. Office of Management and Budget (OMB)

The official website of the U.S. Federal Emergency Management Agency (FEMA)