Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Malonee Mill, we use the following websites to find information relevant to Malonee Mill and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Malonee Mill
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Malonee Mill:
- 35.227873, -83.409044
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Malonee Mill
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Macon County as the starting point when you click on the link below:
- eBird sighting report for Macon County
- Since Malonee Mill is near Jackson County and also Swain County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Jackson County
- eBird sighting report for Swain County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Curious and Interesting Names Near Malonee Mill ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Blossomtown
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Blossomtown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blossomtown
- Blossomtown is located in Macon County
- Burningtown
(3 miles [4.8 km] to the west)- Note: The GPS coordinates that we are using for Burningtown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burningtown
- Burningtown is located in Macon County
- Dean
(2 miles [3.2 km] to the east) - Deans Mill
(3 miles [4.8 km] to the west)- Note: The GPS coordinates that we are using for Deans Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deans Mill
- Deans Mill is located in Macon County
- Franklin
(3 miles [4.8 km] to the southeast)- Jump to our Gazetteer entry for Franklin
- Franklin is located in Macon County
- Population from the 2020 Census: 4,121 people
- Jump to TripAdvisor's Tourism page for Franklin <2>
- Leatherman
(4 miles [6.4 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Leatherman. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Leatherman
- Leatherman is located in Macon County
- Oak Grove
(4 miles [6.4 km] to the northwest) - Pumpkintown
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for Pumpkintown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pumpkintown
- Pumpkintown is located in Jackson County
- Shallow Ford
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Shallow Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shallow Ford
- Shallow Ford is located in Macon County
- Slickrock Ford
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Slickrock Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slickrock Ford
- Slickrock Ford is located in Macon County
- Union
(7 miles [11.3 km] to the south)
How Far From Malonee Mill to ...
We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Malonee Mill to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance<4> beginning in Malonee Mill and extending to:
- Franklin, which is the Seat of Macon County, lies just to the South Southeast.
- Raleigh, which is the State Capital of North Carolina, lies 270 miles [434.5 km]<4> to the east (E). If you could drive a straight line from Malonee Mill to Raleigh, with an average speed<5>of 63 miles [101.4 km] per hour, it would take four to five hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 16 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 11 days.
- The White House (Washington, DC) is 432 miles [695.2 km] to the northeast (NE). Driving would take most of a day, a buggy would take 17 days and walking would take 25 days.
- The shortest distance<6> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,329 miles [10,185.5 km] and it lies to the northeast (NE).<7>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,035 miles [11,321.7 km] and it lies to the northeast (NE).<8>
- The distance to Saint Peter's Basilica (The Vatican) is 4,912 miles [7,905.1 km] and it lies to the northeast (NE).<9>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Malonee Mill. If you can help, please contact us through our Feedback Page.
The official website for Macon County: www.maconnc.org/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Malonee Mill) to Point B.Our distance measurements begin at a specific point in Malonee Mill. The point we use is located at these GPS coordinates - Latitude: 35.2279, Longitude: -83.4090 In this case, the coordinates for Malonee Mill have been provided by the Geographic Names Information System (GNIS). |
| <5> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <6> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Malonee Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <7> | The calculated bearing (or angle) to Jerusalem is 311.723 degrees. |
| <8> | The calculated bearing (or angle) to Mecca is 307.276 degrees. |
| <9> | The calculated bearing (or angle) to the Vatican is 308.522 degrees. |