Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Leggett had a post office and no railroad service. In 2020, Leggett had a population of 54 people.
The following communities are listed based on their distance from Leggett, with the one closest to Leggett listed first.
- Lawrence
(4 miles [6.4 km] to the east)
- Hartsboro
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Hartsboro. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hartsboro
- Hartsboro is located in Edgecombe County
- Google driving directions:
- From your current location to Hartsboro
- From Leggett to Hartsboro
- Tarboro
(6 miles [9.7 km] to the south)
- Penelo
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Penelo have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penelo
- Penelo is located in Edgecombe County
- Mildred
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Mildred have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mildred
- Mildred is located in Edgecombe County
- Coakley
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Coakley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Coakley
- Coakley is located in Edgecombe County
- Google driving directions:
- From your current location to Coakley
- From Leggett to Coakley
- Hobgood
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Hobgood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobgood
- Hobgood is located in Halifax County
- Population from the 2020 Census: 315 people
- Whitakers
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Whitakers have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitakers
- Whitakers is located in Edgecombe County
- Population from the 2020 Census: 700 people
- Jump to TripAdvisor's Tourism page for Whitakers <3>
- Battleboro
(10 miles [16.1 km] to the northwest)
- Rocky Mount
(12 miles [19.3 km] to the west)
- Old Sparta
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Old Sparta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Sparta
- Old Sparta is located in Edgecombe County
- Conetoe
(13 miles [20.9 km] to the southeast)
- Scotland Neck
(13 miles [20.9 km] to the northeast)
- Enfield
(14 miles [22.5 km] to the north)
- Palmyra
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Palmyra. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Palmyra
- Palmyra is located in Halifax County
- Google driving directions:
- From your current location to Palmyra
- From Leggett to Palmyra
- Gold Rock
(14 miles [22.5 km] to the northwest)
- Saint Lewis
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Lewis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Lewis
- Saint Lewis is located in Edgecombe County
- Conoho
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Conoho have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conoho
- Conoho is located in Martin County
- Sharpsburg
(16 miles [25.7 km] to the southwest)
- Bethel
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Pitt County
- Population from the 2020 Census: 1,614 people
- Jump to TripAdvisor's Tourism page for Bethel <3>
- Hassell
(17 miles [27.4 km] to the east)
- Spring Hill
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Halifax County
- Glenview
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Glenview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glenview
- Glenview is located in Halifax County
- Bridgersville
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Bridgersville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bridgersville
- Bridgersville is located in Wilson County
- Parmele
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Parmele have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parmele
- Parmele is located in Martin County
- Population from the 2020 Census: 253 people
- Norfleet
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Norfleet have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norfleet
- Norfleet is located in Halifax County
- Tillery
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Tillery have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tillery
- Tillery is located in Halifax County
- Jump to TripAdvisor's Tourism page for Tillery <3>
- Red Oak
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Red Oak have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Oak
- Red Oak is located in Nash County
- Population from the 2020 Census: 3,492 people
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Leggett. If you can help, please contact us through our Feedback Page.
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Leggett, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |