Welcome to Henderson ...
So far, we found very little information about Henderson. The little that we've found leads us believe that the community is historic.<1>
We've added Henderson to our Gazetteer with the hope that we can develop more information. If you can help us with Henderson, please Contact Us.
Henderson would have been located within present day Wilkes County<2>.
While the community is gone, the present day location for Henderson is 1,020 feet [311 m] above sea level.<3>.
Time Zone: The area where Henderson was located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time
The Area Codes where Henderson was located: 336 & 743<4>
Communities Also Named Henderson ...
Using our Gazetteer, we found that there are two North Carolina communities named Henderson: This one is located in Wilkes County and the other is located in Vance County.
Beyond North Carolina, there are 48 communities that are also named Henderson - they are located in Alabama (2), Arkansas (2), California (3), Colorado (2), Florida, Georgia, Illinois (2), Indiana, Iowa, Kansas, Kentucky, Louisiana (2), Maine, Maryland, Michigan (5), Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New York, Ohio, Oklahoma, Ontario, Oregon, Pennsylvania (4), Tennessee (2), Texas, Virginia and West Virginia (2).
For more information, see our Tidbits & Trivia Page for Henderson.
Communities near Henderson ...
We have created a list of 10 communities that are near Henderson.
- Elkin
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Elkin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elkin
- Elkin is located in Surry County
- Population from the 2020 Census: 4,001 people
- Jump to TripAdvisor's Tourism page for Elkin <6>
- Jonesville
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Jonesville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesville
- Jonesville is located in Yadkin County
- Population from the 2020 Census: 2,206 people
- Jump to TripAdvisor's Tourism page for Jonesville <6>
- Taylorsville
(17 miles [27.4 km] to the south)
- Arlington
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arlington
- Arlington is located in Yadkin County
- Ronda
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Ronda have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ronda
- Ronda is located in Wilkes County
- Population from the 2020 Census: 406 people
- Jump to TripAdvisor's Tourism page for Ronda <6>
- Love Valley
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Love Valley have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Love Valley
- Love Valley is located in Iredell County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Love Valley <6>
- Adley
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Adley. Although the coordinates have been estimated, they should be in the vicinity.<7>
- Jump to our Gazetteer entry for Adley
- Adley is located in Wilkes County
- Stokes ‑ Historic
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Stokes have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stokes
- Stokes is located in Wilkes County
- Hays
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Hays have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hays
- Hays is located in Wilkes County
- Jump to TripAdvisor's Tourism page for Hays <6>
- Millers Creek
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Millers Creek have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millers Creek
- Millers Creek is located in Wilkes County
- Jump to TripAdvisor's Tourism page for Millers Creek <6>
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Henderson. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Henderson.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Henderson. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Henderson.
We also have a detailed list of newspapers that have been published in the area around Henderson. See our Newspapers Page for Henderson.
Off-the-Road Links ...
The official website for Wilkes County: www.wilkescounty.net/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Henderson, please let us know so that we can improve our accuracy. |
<2> | If you're interested in how the shape of North Carolina's counties, including Wilkes, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<3> | The elevation is an estimate for the area around Henderson - it will be higher in some places and lower in others. |
<4> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 336 code has been Overlayed with the 743 area code. New phone numbers in the Henderson area will be assigned with one of these codes: 336 or 743. As a result, placing a call in the Henderson area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<6> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<7> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |