Welcome to Hays Mill ...
Hays Mill is located in Sampson County<1>.
A typical abbreviation for Hays Mill: Hays Ml. (or less commonly used: Hays Mll.)
See our Genealogy Helper Page for Hays Mill for more information about variations on the name of Hays Mill.
Hays Mill is 150 feet [46 m] above sea level.<2>.
Time Zone: Hays Mill lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Hays Mill: 910 & 472<3>
Communities Also Named Hays Mill ...
Using our Gazetteer, we found that there are 3 communities that are also named Hays Mill - they are located in Alabama and Pennsylvania (2).
For more information, see our Tidbits & Trivia Page for Hays Mill.
Communities near Hays Mill ...
We have created a list of 10 communities that are near Hays Mill.
- Fayetteville
(15 miles [24.1 km] to the west)
- Spring Lake
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Spring Lake have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake
- Spring Lake is located in Cumberland County
- Population from the 2020 Census: 11,980 people
- Jump to TripAdvisor's Tourism page for Spring Lake <4>
- Dunn
(12 miles [19.3 km] to the north)
- Clinton
(18 miles [29 km] to the southeast)
- Erwin
(14 miles [22.5 km] to the north)
- Benson
(18 miles [29 km] to the north)
- Eastover
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Eastover
- Eastover is located in Cumberland County
- Estimated population in 2015: 3,677 people
- Roseboro
(12 miles [19.3 km] to the southeast)
- Stedman
(8 miles [12.9 km] to the southwest)
- Wade
(7 miles [11.3 km] to the northwest)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Hays Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Hays Mill.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Hays Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Hays Mill.
We also have a detailed list of newspapers that have been published in the area around Hays Mill. See our Newspapers Page for Hays Mill.
TripAdvisor Tourism Pages for Hays Mill ...
Looking for more information about Hays Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Hays Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Hays Mill.
Footnotes ...
| <1> | If you're interested in how the shape of North Carolina's counties, including Sampson, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Hays Mill - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 910 code has been Overlayed with the 472 area code. New phone numbers in the Hays Mill area will be assigned with one of these codes: 910 or 472. As a result, placing a call in the Hays Mill area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |