RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Columbus County >> Goose Hollow >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Goose Hollow in the Atlas, the following communities of the 1890's would have been found near the current location of Goose Hollow. The following communities are listed based on their distance, with the one closest to Goose Hollow listed first.

  • Bolton
    (Less than 2 miles to the south)
  • Byrdville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Byrdville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Byrdville
    • Byrdville is located in Columbus County
  • Lake Waccamaw
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Lake Waccamaw have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Waccamaw
    • Lake Waccamaw is located in Columbus County
    • Population from the 2020 Census: 1,392 people
    • Jump to TripAdvisor's Tourism page for Lake Waccamaw <2>
  • Council
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Council
    • Council is located in Bladen County
  • Freeman
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Freeman have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freeman
    • Freeman is located in Columbus County
  • Armour
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Armour have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Armour
    • Armour is located in Columbus County
  • Kelly
    (9 miles [14.5 km] to the northeast)
    • Jump to our Gazetteer entry for Kelly
    • Kelly is located in Bladen County
  • Rosindale
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rosindale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rosindale
    • Rosindale is located in Bladen County
  • Westbrook
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Westbrook
    • Westbrook is located in Bladen County
  • Colly
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Colly have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colly
    • Colly is located in Bladen County
  • Hallsboro
    (11 miles [17.7 km] to the west)
    • Jump to our Gazetteer entry for Hallsboro
    • Hallsboro is located in Columbus County
  • Emerson
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Emerson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emerson
    • Emerson is located in Bladen County
  • Northwest
    (14 miles [22.5 km] to the east)
    • Jump to our Gazetteer entry for Northwest
    • Northwest is located in Brunswick County
    • Population from the 2020 Census: 806 people
  • Elkton
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Elkton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elkton
    • Elkton is located in Bladen County
  • Makatoka
    (15 miles [24.1 km] to the south)
    • Jump to our Gazetteer entry for Makatoka
    • Makatoka is located in Brunswick County
  • Old Dock
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Old Dock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Dock
    • Old Dock is located in Columbus County
  • Exum
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Exum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Exum
    • Exum is located in Brunswick County
  • Point Caswell
    (16 miles [25.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Point Caswell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point Caswell
    • Point Caswell is located in Pender County
  • Whiteville
    (16 miles [25.7 km] to the west)
  • Clarkton
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkton
    • Clarkton is located in Bladen County
    • Population from the 2020 Census: 741 people
    • Jump to TripAdvisor's Tourism page for Clarkton <2>
  • Malmo
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Malmo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malmo
    • Malmo is located in Brunswick County
  • Atkinson
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkinson
    • Atkinson is located in Pender County
    • Population from the 2020 Census: 366 people
    • Jump to TripAdvisor's Tourism page for Atkinson <2>
  • Currie
    (19 miles [30.6 km] to the northeast)
  • Ash
    (20 miles [32.2 km] to the south)
    • Jump to our Gazetteer entry for Ash
    • Ash is located in Brunswick County
  • Phoenix
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Phoenix have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Phoenix
    • Phoenix is located in Brunswick County
  • Montague
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Montague have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montague
    • Montague is located in Pender County
  • Ivanhoe
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ivanhoe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ivanhoe
    • Ivanhoe is located in Sampson County

The official website for Columbus County: www.columbusco.org/main

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Goose Hollow, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024