Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Gaddysville had a population of 18 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Gaddysville, with the one closest to Gaddysville listed first.
- Echo
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Echo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Echo
- Echo is located in Robeson County
- Rowland
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <3>
- Dillon
(8 miles [12.9 km] to the west)
- Barnesville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Barnesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnesville
- Barnesville is located in Robeson County
- Alfordsville
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Alfordsville
- Alfordsville is located in Robeson County
- Little Rock
(10 miles [16.1 km] to the west)
- Fork
(11 miles [17.7 km] to the south)
- Orrum
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Orrum have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrum
- Orrum is located in Robeson County
- Population from the 2020 Census: 72 people
- Latta
(14 miles [22.5 km] to the southwest)
- Zion
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Zion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion
- Zion is located in Marion County (SC)
- Fair Bluff
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Fair Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fair Bluff
- Fair Bluff is located in Columbus County
- Population from the 2020 Census: 879 people
- Nichols
(15 miles [24.1 km] to the south)
- Lowe
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Lowe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowe
- Lowe is located in Robeson County
- Moss Neck
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Moss Neck have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moss Neck
- Moss Neck is located in Robeson County
- Pembroke
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Mullins
(16 miles [25.7 km] to the south)
- Pates
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Pates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pates
- Pates is located in Robeson County
- Lumberton
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Red Banks
(17 miles [27.4 km] to the north)
- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
- Sellers
(18 miles [29 km] to the southwest)
- Cerro Gordo
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Cerro Gordo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cerro Gordo
- Cerro Gordo is located in Columbus County
- Population from the 2020 Census: 195 people
- Evergreen
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Columbus County
- Alma
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Alma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alma
- Alma is located in Robeson County
- Allenton
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Buie
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Buie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buie
- Buie is located in Robeson County
- Clio
(20 miles [32.2 km] to the northwest)
- Jump to our Gazetteer entry for Clio
- Clio is located in Marlboro County (SC)
- Population from the 2020 Census: 645 people
- Jump to TripAdvisor's Tourism page for Clio <3>
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gaddysville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |