|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Daniels in the Atlas, the following communities of the 1890's would have been found near the current location of Daniels. The following communities are listed based on their distance, with the one closest to Daniels listed first.
- Reepsville
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Reepsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reepsville
- Reepsville is located in Lincoln County
- Lincolnton
(4 miles [6.4 km] to the southeast)
- Orleans
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Orleans have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orleans
- Orleans is located in Lincoln County
- Plateau
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Plateau. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plateau
- Plateau is located in Catawba County
- Crouse
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Crouse have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crouse
- Crouse is located in Lincoln County
- Henry
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Henry. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Henry
- Henry is located in Lincoln County
- Blackburn
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Blackburn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Blackburn
- Blackburn is located in Catawba County
- Maiden
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Maiden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maiden
- Maiden is located in Catawba County
- Population from the 2020 Census: 3,421 people
- Jump to TripAdvisor's Tourism page for Maiden <3>
- Hulls Crossroads
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hulls Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hulls Crossroads
- Hulls Crossroads is located in Lincoln County
- North Brook ‑ Historic
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for North Brook. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for North Brook
- North Brook is located in Lincoln County
- Startown
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Startown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Startown
- Startown is located in Catawba County
- Cherryville
(10 miles [16.1 km] to the south)
- Iron Station
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Iron Station
- Iron Station is located in Lincoln County
- Belwood
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Belwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belwood
- Belwood is located in Cleveland County
- Population from the 2020 Census: 963 people
- Hardins
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Hardins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardins
- Hardins is located in Gaston County
- Newton
(11 miles [17.7 km] to the northeast)
- Toluca
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Toluca have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toluca
- Toluca is located in Cleveland County
- Fallston
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Fallston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fallston
- Fallston is located in Cleveland County
- Population from the 2020 Census: 610 people
- Jump to TripAdvisor's Tourism page for Fallston <3>
- Waco
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Waco
- Waco is located in Cleveland County
- Population from the 2020 Census: 319 people
- Perry
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Perry. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Perry
- Perry is located in Gaston County
- Knob Creek
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Knob Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Knob Creek
- Knob Creek is located in Cleveland County
- Beam Mill
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Beam Mill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beam Mill
- Beam Mill is located in Cleveland County
- Camp Creek
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Camp Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Camp Creek
- Camp Creek is located in Burke County
- Machpelah
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Machpelah
- Machpelah is located in Lincoln County
- Conover
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Conover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conover
- Conover is located in Catawba County
- Population from the 2020 Census: 8,573 people
- Jump to TripAdvisor's Tourism page for Conover <3>
- Shoups Ford
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Shoups Ford. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Shoups Ford
- Shoups Ford is located in Burke County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Daniels. If you can help, please contact us through our Feedback Page. The official website for Lincoln County: www.co.lincoln.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Daniels, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|