Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Cloverhill Plantation in the Atlas, the following communities of the 1890's would have been found near the current location of Cloverhill Plantation. The following communities are listed based on their distance, with the one closest to Cloverhill Plantation listed first.
- Yadkin Valley
(Less than 2 miles to the northeast)- Note: The GPS coordinates that we are using for Yadkin Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yadkin Valley
- Yadkin Valley is located in Caldwell County
- Cilley ‑ Historic
(2 miles [3.2 km] to the northeast) - Patterson
(3 miles [4.8 km] to the west) - Emanuel ‑ Historic
(4 miles [6.4 km] to the southeast) - Buffalo Cove
(5 miles [8 km] to the north)- Note: The GPS coordinates that we are using for Buffalo Cove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo Cove
- Buffalo Cove is located in Caldwell County
- Hibriten ‑ Historic
(5 miles [8 km] to the south) - Kings Creek
(6 miles [9.7 km] to the east)- Jump to our Gazetteer entry for Kings Creek
- Kings Creek is located in Caldwell County
- Lenoir
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Lenoir
- Lenoir is located in Caldwell County
- Population from the 2020 Census: 17,911 people
- Former name for Lenoir:
- Tucker's Barn
- Jump to TripAdvisor's Tourism page for Lenoir <3>
- Elkville
(7 miles [11.3 km] to the northeast) - Darby
(7 miles [11.3 km] to the north) - Penley ‑ Historic
(8 miles [12.9 km] to the north) - Cedar Valley
(8 miles [12.9 km] to the southeast)- Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Valley
- Cedar Valley is located in Caldwell County
- Draco
(8 miles [12.9 km] to the southeast) - Hendrix ‑ Historic
(10 miles [16.1 km] to the northeast) - Mount Zion
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for Mount Zion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Wilkes County
- Collettsville
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Collettsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collettsville
- Collettsville is located in Caldwell County
- Jump to TripAdvisor's Tourism page for Collettsville <3>
- Gamewell
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Gamewell
- Gamewell is located in Caldwell County
- Population from the 2020 Census: 3,993 people
- Hudson
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Hudson
- Hudson is located in Caldwell County
- Population from the 2020 Census: 3,703 people
- Former name for Hudson:
- Hudsonville
- Jump to TripAdvisor's Tourism page for Hudson <3>
- Aho
(11 miles [17.7 km] to the northwest) - Upton
(11 miles [17.7 km] to the west) - Globe
(11 miles [17.7 km] to the west) - Downsville ‑ Historic
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Downsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downsville
- Downsville is located in Caldwell County
- Ready Branch
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Ready Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ready Branch
- Ready Branch is located in Wilkes County
- Blowing Rock
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Blowing Rock
- Blowing Rock is located in Caldwell County
- Population from the 2020 Census: 1,316 people
- Jump to TripAdvisor's Tourism page for Blowing Rock <3>
- Muttenz ‑ Historic
(13 miles [20.9 km] to the southwest) - Triplett
(13 miles [20.9 km] to the north) - Hartland
(13 miles [20.9 km] to the southwest) - Sawmills
(13 miles [20.9 km] to the south) - Bamboo
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Bamboo
- Bamboo is located in Watauga County
- Maple Springs
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Maple Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Springs
- Maple Springs is located in Wilkes County
- Stony Fork
(13 miles [20.9 km] to the north)- Jump to our Gazetteer entry for Stony Fork
- Stony Fork is located in Watauga County
Off-the-Road Links ...
The official website for Caldwell County: www.co.caldwell.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cloverhill Plantation, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |