|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Wellington Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wellington Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Wellington Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Rennert
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
- Rex
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Shannon
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Shannon
- Shannon is located in Robeson County
- Lumber Bridge
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- Saint Pauls
(5 miles [8 km] to the east)
- Parkton
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Red Springs
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Philadelphus
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Philadelphus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
- Saddletree
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Rozier Siding ‑ Historic
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Dundarrach
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Dundarrach have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dundarrach
- Dundarrach is located in Hoke County
- Prospect
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prospect
- Prospect is located in Robeson County
- Barker Ten Mile
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Timberlake
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timberlake
- Timberlake is located in Cumberland County
- Rockfish
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Rockfish have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockfish
- Rockfish is located in Hoke County
- Pates
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pates
- Pates is located in Robeson County
- Pembroke
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Ardulusa
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Ardulusa
- Ardulusa is located in Cumberland County
- Hope Mills
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hope Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <3>
- Red Banks
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
- Cumberland
(13 miles [20.9 km] to the northeast)
- Raeford
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Raeford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raeford
- Raeford is located in Hoke County
- Population from the 2020 Census: 4,956 people
- Jump to TripAdvisor's Tourism page for Raeford <3>
- Lumberton
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Silver City
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Hoke County
- Bowmore
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Bowmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowmore
- Bowmore is located in Hoke County
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wellington Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.8274, Longitude: -79.0723 In this case, the coordinates for the Wellington Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|