|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Poplin Grove Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Poplin Grove Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Poplin Grove Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cedar Village
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Cedar Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Village
- Cedar Village is located in Stanly County
- Albemarle
(Less than 2 miles to the northeast)
- Plyer
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Plyer. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plyer
- Plyer is located in Stanly County
- Bloomington
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bloomington. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bloomington
- Bloomington is located in Stanly County
- Badin
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Badin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Badin
- Badin is located in Stanly County
- Population from the 2020 Census: 1,934 people
- Jump to TripAdvisor's Tourism page for Badin <3>
- New London
(7 miles [11.3 km] to the north)
- Lambert
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Lambert
- Lambert is located in Stanly County
- Palmerville
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Palmerville
- Palmerville is located in Stanly County
- Red Cross
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Red Cross have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Cross
- Red Cross is located in Stanly County
- Population from the 2020 Census: 769 people
- Richfield
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Richfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richfield
- Richfield is located in Stanly County
- Population from the 2020 Census: 627 people
- Jump to TripAdvisor's Tourism page for Richfield <3>
- Oakboro
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakboro
- Oakboro is located in Stanly County
- Population from the 2020 Census: 1,928 people
- Jump to TripAdvisor's Tourism page for Oakboro <3>
- Norwood
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norwood
- Norwood is located in Stanly County
- Population from the 2020 Census: 2,469 people
- Jump to TripAdvisor's Tourism page for Norwood <3>
- Misenheimer
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Misenheimer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Misenheimer
- Misenheimer is located in Stanly County
- Population from the 2020 Census: 742 people
- Roper ‑ Historic
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Roper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roper
- Roper is located in Anson County
- Mount Pleasant
(12 miles [19.3 km] to the west)
- Locust
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust
- Locust is located in Stanly County
- Population from the 2020 Census: 3,270 people
- Jump to TripAdvisor's Tourism page for Locust <3>
- Stanfield
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanfield
- Stanfield is located in Stanly County
- Population from the 2020 Census: 1,552 people
- Jump to TripAdvisor's Tourism page for Stanfield <3>
- Eldorado
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Eldorado
- Eldorado is located in Montgomery County
- Blaine
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Blaine. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Blaine
- Blaine is located in Montgomery County
- Wadeville
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wadeville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wadeville
- Wadeville is located in Montgomery County
- Gold Hill
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Gold Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gold Hill
- Gold Hill is located in Rowan County
- Jump to TripAdvisor's Tourism page for Gold Hill <3>
- Burnsville
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Anson County
- Mount Gilead
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Montgomery County
- Population from the 2020 Census: 1,141 people
- Ophir
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ophir. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ophir
- Ophir is located in Montgomery County
- Garfield ‑ Historic
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Garfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garfield
- Garfield is located in Rowan County
Off-the-Road Links ...
The official website for Stanly County: www.co.stanly.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Poplin Grove Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.3396, Longitude: -80.2201 In this case, the coordinates for the Poplin Grove Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|