|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Oakhaven Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Oakhaven Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Oakhaven Cemetery. We've listed the following communities based on their distance, with the closest first.
- Edward
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Edward have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edward
- Edward is located in Beaufort County
- Jump to TripAdvisor's Tourism page for Edward <3>
- Aurora
(4 miles [6.4 km] to the east)
- Blounts Creek
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Blounts Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blounts Creek
- Blounts Creek is located in Beaufort County
- Spring Hope
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Spring Hope. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Spring Hope
- Spring Hope is located in Craven County
- Bay City
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bay City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bay City
- Bay City is located in Pamlico County
- Bath
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Bath have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bath
- Bath is located in Beaufort County
- Population from the 2020 Census: 241 people
- Jump to TripAdvisor's Tourism page for Bath <3>
- Grantsboro
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Grantsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grantsboro
- Grantsboro is located in Pamlico County
- Population from the 2020 Census: 651 people
- Jump to TripAdvisor's Tourism page for Grantsboro <3>
- Pomouk Indian Village ‑ Historic
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Pomouk Indian Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pomouk Indian Village
- Pomouk Indian Village is located in Beaufort County
- Ernul
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Ernul have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ernul
- Ernul is located in Craven County
- Alliance
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Alliance have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alliance
- Alliance is located in Pamlico County
- Population from the 2020 Census: 759 people
- Jump to TripAdvisor's Tourism page for Alliance <3>
- Whitepost
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Whitepost
- Whitepost is located in Beaufort County
- Whitepost has also been known as:
- White Post
- Reelsboro
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Reelsboro. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Reelsboro
- Reelsboro is located in Pamlico County
- Bayboro
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Bayboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bayboro
- Bayboro is located in Pamlico County
- Population from the 2020 Census: 1,242 people
- Jump to TripAdvisor's Tourism page for Bayboro <3>
- Stonewall
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Stonewall
- Stonewall is located in Pamlico County
- Population from the 2020 Census: 269 people
- Ransomville
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Ransomville
- Ransomville is located in Beaufort County
- Vandemere
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Vandemere have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vandemere
- Vandemere is located in Pamlico County
- Population from the 2020 Census: 243 people
- Mesic
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Mesic
- Mesic is located in Pamlico County
- Population from the 2020 Census: 210 people
- Bridgeton
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Bridgeton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bridgeton
- Bridgeton is located in Craven County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Bridgeton <3>
- River Road
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for River Road have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for River Road
- River Road is located in Beaufort County
- Lowland
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Lowland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowland
- Lowland is located in Pamlico County
- Vanceboro
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Vanceboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vanceboro
- Vanceboro is located in Craven County
- Population from the 2020 Census: 955 people
- Jump to TripAdvisor's Tourism page for Vanceboro <3>
- Lima
(17 miles [27.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lima. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lima
- Lima is located in Craven County
- Fairfield Harbour
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Fairfield Harbour have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield Harbour
- Fairfield Harbour is located in Craven County
- Merritt
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Merritt
- Merritt is located in Pamlico County
- Hobucken
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Hobucken have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobucken
- Hobucken is located in Pamlico County
- Washington Park
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Washington Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Washington Park
- Washington Park is located in Beaufort County
- Population from the 2020 Census: 429 people
Off-the-Road Links ...
The official website for Beaufort County: www.co.beaufort.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Oakhaven Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.3154, Longitude: -76.8647 In this case, the coordinates for the Oakhaven Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|