|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Northside Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Northside Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Northside Cemetery. We've listed the following communities based on their distance, with the closest first.
- Fayetteville
(Less than 2 miles to the south)
- Holly Springs
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Holly Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holly Springs
- Holly Springs is located in Cumberland County
- Highland Village
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Highland Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Village
- Highland Village is located in Cumberland County
- Williams Village
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Williams Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williams Village
- Williams Village is located in Cumberland County
- North Point Village
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for North Point Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Point Village
- North Point Village is located in Cumberland County
- Shaw
(4 miles [6.4 km] to the northwest)
- Bonnie Doone
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Bonnie Doone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnie Doone
- Bonnie Doone is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Bonnie Doone <2>
- Vander
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Vander have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vander
- Vander is located in Cumberland County
- Eastover
(5 miles [8 km] to the east)
- Judson
(6 miles [9.7 km] to the southeast)
- Cumberland
(7 miles [11.3 km] to the southwest)
- Hope Mills
(8 miles [12.9 km] to the southwest)
- Ardulusa
(8 miles [12.9 km] to the south)
- Spring Lake
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Spring Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake
- Spring Lake is located in Cumberland County
- Population from the 2020 Census: 11,980 people
- Jump to TripAdvisor's Tourism page for Spring Lake <2>
- Fort Bragg
(8 miles [12.9 km] to the northwest)
- Timberlake
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timberlake
- Timberlake is located in Cumberland County
- Wade
(9 miles [14.5 km] to the northeast)
- Manchester
(10 miles [16.1 km] to the northwest)
- Stedman
(11 miles [17.7 km] to the southeast)
- Rockfish
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Rockfish have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockfish
- Rockfish is located in Hoke County
- Twin Lakes
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Twin Lakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Lakes
- Twin Lakes is located in Harnett County
- Overhills
(13 miles [20.9 km] to the northwest)
- Parkton
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <2>
- Autryville
(14 miles [22.5 km] to the east)
- Falcon
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Falcon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falcon
- Falcon is located in Cumberland County
- Population from the 2020 Census: 250 people
- Godwin
(14 miles [22.5 km] to the northeast)
- Linden
(14 miles [22.5 km] to the northeast)
- Walkertown
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walkertown
- Walkertown is located in Harnett County
- Anderson Creek
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Anderson Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson Creek
- Anderson Creek is located in Harnett County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Northside Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.0762, Longitude: -78.8726 |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|