RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Rutherford County >> Mt. Pleasant Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Mt. Pleasant Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Pleasant Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Mt. Pleasant Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Bat Cave
    (4 miles [6.4 km] to the southwest)
  • Village of Chimney Rock Village
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Village of Chimney Rock Village have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Village of Chimney Rock Village
    • Village of Chimney Rock Village is located in Rutherford County
    • Estimated population in 2015: 108 people
  • Chimney Rock
    (4 miles [6.4 km] to the south)
  • Lake Lure
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Lure
    • Lake Lure is located in Rutherford County
    • Population from the 2020 Census: 1,153 people
    • Jump to TripAdvisor's Tourism page for Lake Lure <2>
  • Bearwallow
    (5 miles [8 km] to the southwest)
  • Gerton
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gerton
    • Gerton is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Gerton <2>
  • Otter Creek ‑ Historic
    (7 miles [11.3 km] to the east)
  • Whitehouse
    (7 miles [11.3 km] to the east)
  • Moffitt Hill
    (7 miles [11.3 km] to the north)
  • Ridgecrest
    (8 miles [12.9 km] to the north)
  • Lackey Town
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lackey Town have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lackey Town
    • Lackey Town is located in McDowell County
  • Old Fort
    (8 miles [12.9 km] to the north)
  • Black Mountain
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Black Mountain
    • Black Mountain is located in Buncombe County
    • Population from the 2020 Census: 8,256 people
    • Jump to TripAdvisor's Tourism page for Black Mountain <2>
  • Dendron
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Dendron have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dendron
    • Dendron is located in McDowell County
  • Montreat
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montreat
    • Montreat is located in Buncombe County
    • Population from the 2020 Census: 939 people
    • Jump to TripAdvisor's Tourism page for Montreat <2>
  • Sugar Hill
    (11 miles [17.7 km] to the northeast)
  • Swannanoa
    (11 miles [17.7 km] to the northwest)
  • Green Hill
    (12 miles [19.3 km] to the southeast)
  • Walkertown
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walkertown
    • Walkertown is located in Buncombe County
  • Greenlee
    (12 miles [19.3 km] to the northeast)
  • Wilson
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wilson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilson
    • Wilson is located in Buncombe County
  • Providence
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Providence
    • Providence is located in McDowell County
  • U-No
    (14 miles [22.5 km] to the southwest)
  • Dana
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Dana have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dana
    • Dana is located in Henderson County
  • Baxter
    (14 miles [22.5 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Baxter. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Baxter
    • Baxter is located in Henderson County
    • Google driving directions:
    • From your current location to Baxter
    • From the Mt. Pleasant Cemetery to Baxter
  • Mill Spring
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mill Spring
    • Mill Spring is located in Polk County
    • Jump to TripAdvisor's Tourism page for Mill Spring <2>
  • Union Mills
    (14 miles [22.5 km] to the east)
  • Thermal City
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Thermal City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thermal City
    • Thermal City is located in Rutherford County
  • Azalea
    (14 miles [22.5 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Azalea. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Azalea
    • Azalea is located in Buncombe County
    • Google driving directions:
    • From your current location to Azalea
    • From the Mt. Pleasant Cemetery to Azalea

The official website for Rutherford County: www.rutherfordcountync.gov/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Pleasant Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.5044, Longitude: -82.2269    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025