|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hunt Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hunt Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hunt Cemetery. We've listed the following communities based on their distance, with the closest first.
- Long View
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Long View have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long View
- Long View is located in Bladen County
- Currie
(4 miles [6.4 km] to the east)
- Atkinson
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkinson
- Atkinson is located in Pender County
- Population from the 2020 Census: 366 people
- Jump to TripAdvisor's Tourism page for Atkinson <3>
- Sandyfield
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Sandyfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandyfield
- Sandyfield is located in Columbus County
- Population from the 2020 Census: 415 people
- Armour
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Armour. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Armour
- Armour is located in Columbus County
- Riegelwood
(8 miles [12.9 km] to the south)
- Kelly
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Kelly
- Kelly is located in Bladen County
- East Arcadia
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for East Arcadia
- East Arcadia is located in Bladen County
- Population from the 2020 Census: 470 people
- Acme
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Acme
- Acme is located in Columbus County
- Northwest
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Northwest
- Northwest is located in Brunswick County
- Population from the 2020 Census: 806 people
- Delco
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Delco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delco
- Delco is located in Columbus County
- Jump to TripAdvisor's Tourism page for Delco <3>
- Sandy Creek
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Sandy Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy Creek
- Sandy Creek is located in Brunswick County
- Population from the 2020 Census: 319 people
- Ivanhoe
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ivanhoe. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ivanhoe
- Ivanhoe is located in Sampson County
- Byrdville
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Byrdville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Byrdville
- Byrdville is located in Columbus County
- Malmo
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Malmo. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Malmo
- Malmo is located in Brunswick County
- Phoenix
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Phoenix. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Phoenix
- Phoenix is located in Brunswick County
- Navassa
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Navassa have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Navassa
- Navassa is located in Brunswick County
- Population from the 2020 Census: 2,534 people
- Kerr
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kerr. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kerr
- Kerr is located in Sampson County
- Ashton
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ashton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ashton
- Ashton is located in Pender County
- Saint Helena
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Saint Helena have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Helena
- Saint Helena is located in Pender County
- Population from the 2020 Census: 428 people
- Bolton
(16 miles [25.7 km] to the southwest)
- Rocky Point
(16 miles [25.7 km] to the east)
- Burgaw
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgaw
- Burgaw is located in Pender County
- Population from the 2020 Census: 4,127 people
- Jump to TripAdvisor's Tourism page for Burgaw <3>
- Council
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Council
- Council is located in Bladen County
- Skippers Corner
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Skippers Corner have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skippers Corner
- Skippers Corner is located in New Hanover County
- Castle Hayne
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Castle Hayne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castle Hayne
- Castle Hayne is located in New Hanover County
- Jump to TripAdvisor's Tourism page for Castle Hayne <3>
- Watha
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Watha have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watha
- Watha is located in Pender County
- Population from the 2020 Census: 247 people
Off-the-Road Links ...
The official website for Pender County: www.pender-county.com/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hunt Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4557, Longitude: -78.1775 In this case, the coordinates for the Hunt Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|