|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Holcombe - Branch Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Holcombe - Branch Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Holcombe - Branch Cemetery. We've listed the following communities based on their distance, with the closest first.
- Democrat
(Less than 2 miles to the south)
- Ivy
(Less than 2 miles to the northwest)
- Barnardsville
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Barnardsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnardsville
- Barnardsville is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Barnardsville <3>
- Rockview
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockview
- Rockview is located in Buncombe County
- Mars Hill
(3 miles [4.8 km] to the west)
- Flat Creek
(4 miles [6.4 km] to the southwest)
- Bethel
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Madison County
- Beech
(6 miles [9.7 km] to the south)
- Petersburg
(6 miles [9.7 km] to the west)
- Weaverville
(8 miles [12.9 km] to the southwest)
- Stoney Knob
(9 miles [14.5 km] to the southwest)
- Murchison
(9 miles [14.5 km] to the east)
- Rollins
(9 miles [14.5 km] to the west)
- Pensacola
(10 miles [16.1 km] to the east)
- Concord
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in Yancey County
- Foster Creek
(10 miles [16.1 km] to the northwest)
- Marshall
(10 miles [16.1 km] to the west)
- Alexander
(11 miles [17.7 km] to the southwest)
- Low Gap
(11 miles [17.7 km] to the northeast)
- Woodfin
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodfin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodfin
- Woodfin is located in Buncombe County
- Population from the 2020 Census: 6,679 people
- Jump to TripAdvisor's Tourism page for Woodfin <3>
- Riceville
(12 miles [19.3 km] to the south)
- Higgins
(12 miles [19.3 km] to the northeast)
- Walkertown
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walkertown
- Walkertown is located in Buncombe County
- Burnsville
(13 miles [20.9 km] to the northeast)
- Flag Pond
(14 miles [22.5 km] to the north)
- Asheville
(14 miles [22.5 km] to the south)
- Swannanoa Hills
(14 miles [22.5 km] to the south)
- Walnut
(14 miles [22.5 km] to the west)
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Holcombe - Branch Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.8065, Longitude: -82.4904 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|