RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Granville County >> Granville Memorial Park >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Granville Memorial Park.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Granville Memorial Park.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Granville Memorial Park. We've listed the following cemeteries based on their distance, with the closest first.

  • Clay
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Clay have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clay
    • Clay is located in Granville County
  • Providence
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Providence
    • Providence is located in Granville County
  • Tar River
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for Tar River
    • Tar River is located in Granville County
  • Oxford
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Oxford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oxford
    • Oxford is located in Granville County
    • Population from the 2020 Census: 8,905 people
    • Jump to TripAdvisor's Tourism page for Oxford <3>
  • Fairport
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Fairport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairport
    • Fairport is located in Granville County
  • Hester
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for Hester
    • Hester is located in Granville County
  • Stem
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Stem have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stem
    • Stem is located in Granville County
    • Population from the 2020 Census: 474 people
  • Lyons
    (9 miles [14.5 km] to the southwest)
    • Jump to our Gazetteer entry for Lyons
    • Lyons is located in Granville County
  • Mount Energy
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Mount Energy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Energy
    • Mount Energy is located in Granville County
  • Kittrell
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Kittrell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kittrell
    • Kittrell is located in Vance County
    • Population from the 2020 Census: 155 people
    • Jump to TripAdvisor's Tourism page for Kittrell <3>
  • Dabney
    (9 miles [14.5 km] to the northeast)
    • Jump to our Gazetteer entry for Dabney
    • Dabney is located in Vance County
  • Creedmoor
    (10 miles [16.1 km] to the southwest)
  • Butner
    (11 miles [17.7 km] to the southwest)
  • Gill
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Gill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gill
    • Gill is located in Vance County
  • Bear Pond
    (11 miles [17.7 km] to the east)
    • Jump to our Gazetteer entry for Bear Pond
    • Bear Pond is located in Vance County
  • South Henderson
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for South Henderson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Henderson
    • South Henderson is located in Vance County
  • Bobbitt
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Bobbitt have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bobbitt
    • Bobbitt is located in Vance County
  • Henderson
    (12 miles [19.3 km] to the northeast)
  • Moriah
    (12 miles [19.3 km] to the west)
    • Jump to our Gazetteer entry for Moriah
    • Moriah is located in Person County
  • Franklinton
    (13 miles [20.9 km] to the southeast)
  • Gillburg
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Gillburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gillburg
    • Gillburg is located in Vance County
  • Stovall
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Stovall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stovall
    • Stovall is located in Granville County
    • Population from the 2020 Census: 420 people
  • Bahama
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bahama have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bahama
    • Bahama is located in Durham County
    • Jump to TripAdvisor's Tourism page for Bahama <3>
  • New Light
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for New Light have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Light
    • New Light is located in Wake County
  • Flat Rock
    (16 miles [25.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Flat Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat Rock
    • Flat Rock is located in Vance County
  • Bullock
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Bullock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bullock
    • Bullock is located in Granville County
    • Jump to TripAdvisor's Tourism page for Bullock <3>
  • Mount Tirzah
    (16 miles [25.7 km] to the west)
    • Jump to our Gazetteer entry for Mount Tirzah
    • Mount Tirzah is located in Person County

The official website for Granville County: www.granvillecounty.org/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Granville Memorial Park. The point we use is located at these GPS coordinates - Latitude: 36.2574, Longitude: -78.6125       In this case, the coordinates for the Granville Memorial Park have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 06 Apr 2024