|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Community Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Community Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Community Cemetery. We've listed the following communities based on their distance, with the closest first.
- Princeville
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Princeville
- Princeville is located in Edgecombe County
- Population from the 2020 Census: 1,901 people
- Tarboro
(Less than 2 miles to the northwest)
- Hope Lodge
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for Hope Lodge
- Hope Lodge is located in Edgecombe County
- Fairview
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Edgecombe County
- Summerfield
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Summerfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summerfield
- Summerfield is located in Edgecombe County
- Henrietta
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Henrietta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Henrietta
- Henrietta is located in Edgecombe County
- Coakley
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Coakley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Coakley
- Coakley is located in Edgecombe County
- Conetoe
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Conetoe
- Conetoe is located in Edgecombe County
- Population from the 2020 Census: 263 people
- Speed
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Speed
- Speed is located in Edgecombe County
- Population from the 2020 Census: 74 people
- Leggett
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Leggett
- Leggett is located in Edgecombe County
- Population from the 2020 Census: 54 people
- Hartsease
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hartsease. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hartsease
- Hartsease is located in Edgecombe County
- Hartsboro
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hartsboro. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hartsboro
- Hartsboro is located in Edgecombe County
- Lawrence
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Lawrence
- Lawrence is located in Edgecombe County
- Pinetops
(9 miles [14.5 km] to the southwest)
- Bethel
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Pitt County
- Population from the 2020 Census: 1,614 people
- Jump to TripAdvisor's Tourism page for Bethel <2>
- Lancaster
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Edgecombe County
- Mercer
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mercer. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mercer
- Mercer is located in Edgecombe County
- Hobgood
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hobgood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobgood
- Hobgood is located in Halifax County
- Population from the 2020 Census: 315 people
- Cobb Town
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Cobb Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cobb Town
- Cobb Town is located in Edgecombe County
- Sharp Point
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Sharp Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharp Point
- Sharp Point is located in Edgecombe County
- Parmele
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Parmele have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parmele
- Parmele is located in Martin County
- Population from the 2020 Census: 253 people
- Oak City
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak City
- Oak City is located in Martin County
- Population from the 2020 Census: 281 people
- Jump to TripAdvisor's Tourism page for Oak City <2>
- Roseneath
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Roseneath
- Roseneath is located in Halifax County
- Macclesfield
(13 miles [20.9 km] to the southwest)
- Falkland
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Falkland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falkland
- Falkland is located in Pitt County
- Population from the 2020 Census: 98 people
- Whitehurst
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Whitehurst
- Whitehurst is located in Pitt County
- Hassell
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Hassell
- Hassell is located in Martin County
- Population from the 2020 Census: 75 people
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Community Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.8904, Longitude: -77.5130 In this case, the coordinates for the Community Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|