|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Ball - Hunter Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Ball - Hunter Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Ball - Hunter Cemetery. We've listed the following communities based on their distance, with the closest first.
- Walnut
(3 miles [4.8 km] to the west)
- Marshall
(4 miles [6.4 km] to the south)
- Petersburg
(4 miles [6.4 km] to the southeast)
- Rollins
(5 miles [8 km] to the south)
- Chapel Hill
(5 miles [8 km] to the north)
- Foster Creek
(5 miles [8 km] to the northeast)
- Hurricane
(5 miles [8 km] to the northwest)
- Stackhouse
(5 miles [8 km] to the west)
- White Rock
(6 miles [9.7 km] to the north)
- Cutshalltown
(6 miles [9.7 km] to the north)
- Mars Hill
(7 miles [11.3 km] to the east)
- Allenstand
(8 miles [12.9 km] to the northwest)
- Allegheny
(8 miles [12.9 km] to the north)
- Hot Springs
(8 miles [12.9 km] to the west)
- Ivy
(9 miles [14.5 km] to the east)
- Bluff
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Bluff
- Bluff is located in Madison County
- Google driving directions:
- From your current location to Bluff
- From the Ball - Hunter Cemetery to Bluff
- Spring Creek
(10 miles [16.1 km] to the southwest)
- Flat Creek
(10 miles [16.1 km] to the southeast)
- Alexander
(11 miles [17.7 km] to the south)
- Bethel
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Madison County
- Lynch ‑ Historic
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Lynch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynch
- Lynch is located in Madison County
- Democrat
(12 miles [19.3 km] to the southeast)
- Flag Pond
(12 miles [19.3 km] to the northeast)
- Trust
(13 miles [20.9 km] to the southwest)
- Weaverville
(13 miles [20.9 km] to the southeast)
- Barnardsville
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Barnardsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnardsville
- Barnardsville is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Barnardsville <3>
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Ball - Hunter Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.8664, Longitude: -82.6775 |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|