|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Beulah in the Atlas, the following communities of the 1890's would have been found near the current location of Beulah. The following communities are listed based on their distance, with the one closest to Beulah listed first.
- Clinton
(3 miles [4.8 km] to the north)
- Elliott
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elliott. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elliott
- Elliott is located in Sampson County
- Google driving directions:
- From your current location to Elliott
- From Beulah to Elliott
- Ingold
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ingold. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ingold
- Ingold is located in Sampson County
- Google driving directions:
- From your current location to Ingold
- From Beulah to Ingold
- Parkersburg
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Sampson County
- Taylors Bridge
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Taylors Bridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylors Bridge
- Taylors Bridge is located in Sampson County
- Turkey
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Turkey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turkey
- Turkey is located in Sampson County
- Population from the 2020 Census: 292 people
- Jump to TripAdvisor's Tourism page for Turkey <2>
- Roseboro
(9 miles [14.5 km] to the west)
- Keener
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Keener. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Keener
- Keener is located in Sampson County
- Google driving directions:
- From your current location to Keener
- From Beulah to Keener
- Garland
(11 miles [17.7 km] to the south)
- Waycross
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waycross
- Waycross is located in Sampson County
- Beaman Crossroads
(12 miles [19.3 km] to the north)
- Huntley
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Huntley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntley
- Huntley is located in Sampson County
- Clear Run
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Clear Run have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Run
- Clear Run is located in Sampson County
- Warsaw
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Duplin County
- Population from the 2020 Census: 3,084 people
- Jump to TripAdvisor's Tourism page for Warsaw <2>
- Bowdens
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Bowdens have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowdens
- Bowdens is located in Duplin County
- Hayne
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Hayne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayne
- Hayne is located in Sampson County
- Tomahawk
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tomahawk. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tomahawk
- Tomahawk is located in Sampson County
- Google driving directions:
- From your current location to Tomahawk
- From Beulah to Tomahawk
- Magnolia
(16 miles [25.7 km] to the east)
- Faison
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Faison have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Faison
- Faison is located in Duplin County
- Population from the 2020 Census: 959 people
- Jump to TripAdvisor's Tourism page for Faison <2>
- Ammon
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Ammon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ammon
- Ammon is located in Bladen County
- Autryville
(17 miles [27.4 km] to the west)
- Rose Hill
(19 miles [30.6 km] to the southeast)
- Dobbersville
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Dobbersville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dobbersville
- Dobbersville is located in Sampson County
- Clement
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Clement have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clement
- Clement is located in Sampson County
- Blackmans Mills
(20 miles [32.2 km] to the north)
- Kerr
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Kerr. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kerr
- Kerr is located in Sampson County
- Google driving directions:
- From your current location to Kerr
- From Beulah to Kerr
- Timothy
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Timothy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timothy
- Timothy is located in Sampson County
- Newton Grove
(20 miles [32.2 km] to the north)
- Stedman
(20 miles [32.2 km] to the west)
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Beulah, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|