Welcome to Antioch ...
Antioch is located in Hoke County<1>.
Antioch is 210 feet [64 m] above sea level.<2>.
Time Zone: Antioch lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Antioch: 910 & 472<3>
Communities Also Named Antioch ...
While we believe that this Antioch is located in Hoke County, we know of another 5 North Carolina communities named Antioch. Those communities are located in the following counties: Brunswick, Columbus, Madison, Robeson and Wilkes County.
Beyond North Carolina, there are 95 communities that are also named Antioch - they are located in Alabama (7), Arkansas (6), California, Florida, Georgia (9), Illinois, Indiana (4), Kansas (2), Kentucky (5), Louisiana (3), Mississippi (7), Missouri (2), Nebraska, Ohio (2), Oklahoma (2), Ontario, South Carolina (6), Tennessee (13), Texas (11), Virginia (3) and West Virginia (3).
For more information, see our Tidbits & Trivia Page for Antioch.
Communities near Antioch ...
We have created a list of 10 communities that are near Antioch.
- Hope Mills
(15 miles [24.1 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <5>
- Laurinburg
(17 miles [27.4 km] to the southwest)- Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurinburg
- Laurinburg is located in Scotland County
- Population from the 2020 Census: 14,896 people
- Jump to TripAdvisor's Tourism page for Laurinburg <5>
- Raeford
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Raeford have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raeford
- Raeford is located in Hoke County
- Population from the 2020 Census: 4,956 people
- Jump to TripAdvisor's Tourism page for Raeford <5>
- Red Springs
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <5>
- Pembroke
(14 miles [22.5 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <5>
- Maxton
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <5>
- Saint Pauls
(14 miles [22.5 km] to the east)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <5>
- Wagram
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Wagram have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wagram
- Wagram is located in Scotland County
- Population from the 2020 Census: 772 people
- Jump to TripAdvisor's Tourism page for Wagram <5>
- Parkton
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <5>
- Rennert
(8 miles [12.9 km] to the southeast)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Antioch. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Antioch.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Antioch. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Antioch.
We also have a detailed list of newspapers that have been published in the area around Antioch. See our Newspapers Page for Antioch.
TripAdvisor Tourism Pages for Antioch ...
Looking for more information about Antioch? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Antioch, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Antioch.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Antioch. If you can help, please contact us through our Feedback Page.
The official website for Hoke County: www.hokecounty.org/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | If you're interested in how the shape of North Carolina's counties, including Hoke, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Antioch - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 910 code has been Overlayed with the 472 area code. New phone numbers in the Antioch area will be assigned with one of these codes: 910 or 472. As a result, placing a call in the Antioch area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <6> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |