Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Amity Hill in the Atlas, the following communities of the 1890's would have been found near the current location of Amity Hill. The following communities are listed based on their distance, with the one closest to Amity Hill listed first.
- Shinnville
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Shinnville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shinnville
- Shinnville is located in Iredell County
- Mount Ulla
(3 miles [4.8 km] to the southeast)
- Elmwood
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Elmwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elmwood
- Elmwood is located in Iredell County
- Bear Poplar
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Bear Poplar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear Poplar
- Bear Poplar is located in Rowan County
- Shepherds
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Shepherds. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Shepherds
- Shepherds is located in Iredell County
- Cleveland
(6 miles [9.7 km] to the northeast)
- Troutman
(6 miles [9.7 km] to the west)
- Blackmer ‑ Historic
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Blackmer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackmer
- Blackmer is located in Rowan County
- Barium Springs
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Barium Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Barium Springs
- Barium Springs is located in Iredell County
- Mooresville
(8 miles [12.9 km] to the south)
- Mill Bridge
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Mill Bridge
- Mill Bridge is located in Rowan County
- Statesville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Statesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statesville
- Statesville is located in Iredell County
- Population from the 2020 Census: 28,045 people
- Jump to TripAdvisor's Tourism page for Statesville <3>
- Doolie
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for Doolie
- Doolie is located in Iredell County
- Harts ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Harts have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harts
- Harts is located in Rowan County
- Miranda ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Miranda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miranda
- Miranda is located in Rowan County
- Mount Vernon
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Mount Vernon
- Mount Vernon is located in Rowan County
- Cool Springs
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Cool Springs
- Cool Springs is located in Iredell County
- Watts ‑ Historic
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Watts have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watts
- Watts is located in Iredell County
- Monbo
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Monbo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monbo
- Monbo is located in Catawba County
- Mount Mourne
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Mount Mourne
- Mount Mourne is located in Iredell County
- Woodleaf
(11 miles [17.7 km] to the northeast)
- Mayhew
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Mayhew
- Mayhew is located in Iredell County
- Enochville
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Enochville
- Enochville is located in Rowan County
- Coddle Creek ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Coddle Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coddle Creek
- Coddle Creek is located in Cabarrus County
- China Grove
(13 miles [20.9 km] to the southeast)
Off-the-Road Links ...
The official website for Iredell County: www.co.iredell.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Amity Hill, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |