Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Elmdale Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Elmdale Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Elmdale Cemetery. We've listed the following communities based on their distance, with the closest first.

Enid
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Enid
- Enid is located in Richland County
Fox Lake
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Fox Lake
- Fox Lake is located in Richland County
Lambert
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Lambert
- Lambert is located in Richland County
- Jump to TripAdvisor's Tourism page for Lambert <2>
Brockton
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Brockton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brockton
- Brockton is located in Roosevelt County
- Estimated population in 2018: 234 people
- Jump to TripAdvisor's Tourism page for Brockton <2>
Deertail Indian Village ‑ Historic
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Deertail Indian Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deertail Indian Village
- Deertail Indian Village is located in Roosevelt County
Culbertson
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Culbertson
- Culbertson is located in Roosevelt County
- Population from the 2020 Census: 789 people
- Jump to TripAdvisor's Tourism page for Culbertson <2>
Richey
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Richey
- Richey is located in Dawson County
- Population from the 2020 Census: 169 people
- Jump to TripAdvisor's Tourism page for Richey <2>
Poplar
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Poplar have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar
- Poplar is located in Roosevelt County
- Population from the 2020 Census: 835 people
- Jump to TripAdvisor's Tourism page for Poplar <2>
Bainville
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bainville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bainville
- Bainville is located in Roosevelt County
- Population from the 2020 Census: 317 people
- Jump to TripAdvisor's Tourism page for Bainville <2>
McCabe
(29 miles [46.7 km] to the northeast)
- Jump to our Gazetteer entry for McCabe
- McCabe is located in Roosevelt County
- Jump to TripAdvisor's Tourism page for McCabe <2>

Off-the-Road Links ...

The official website for Richland County: www.richland.org/

The official website for State of Montana: https://mt.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Elmdale Cemetery. The point we use is located at these GPS coordinates - Latitude: 47.9114, Longitude: -104.7622 In this case, the coordinates for the Elmdale Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.