Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Royalton had a population of 582 people in 1895 with a post office and railroad service. In 2020, Royalton had a population of 1,229 people.
The following communities are listed based on their distance from Royalton, with the one closest to Royalton listed first.
- North Prairie
(3 miles [4.8 km] to the southwest)
- Opole
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Opole. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Opole
- Opole is located in Stearns County
- Google driving directions:
- From your current location to Opole
- From Royalton to Opole
- Rice
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice
- Rice is located in Benton County
- Population from the 2020 Census: 1,401 people
- Jump to TripAdvisor's Tourism page for Rice <4>
- Gregory
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gregory
- Gregory is located in Morrison County
- Elmdale
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Elmdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elmdale
- Elmdale is located in Morrison County
- Population from the 2020 Census: 116 people
- Google driving directions:
- From your current location to Elmdale
- From Royalton to Elmdale
- Little Falls
(10 miles [16.1 km] to the north)
- Buckman
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckman
- Buckman is located in Morrison County
- Population from the 2020 Census: 273 people
- Holdingford
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Holdingford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holdingford
- Holdingford is located in Stearns County
- Population from the 2020 Census: 725 people
- Jump to TripAdvisor's Tourism page for Holdingford <4>
- Watab
(11 miles [17.7 km] to the southeast)
- Saint Wendel
(12 miles [19.3 km] to the south)
- Upsala
(13 miles [20.9 km] to the west)
- Saint Anna
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Anna have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Anna
- Saint Anna is located in Stearns County
- Belle Prairie
(14 miles [22.5 km] to the north)
- Morrill
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Morrill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Morrill
- Morrill is located in Morrison County
- Google driving directions:
- From your current location to Morrill
- From Royalton to Morrill
- Collegeville
(16 miles [25.7 km] to the south)
- Avon
(17 miles [27.4 km] to the southwest)
- Sauk Rapids
(17 miles [27.4 km] to the south)
- Gilman
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilman
- Gilman is located in Benton County
- Population from the 2020 Census: 216 people
- Jump to TripAdvisor's Tourism page for Gilman <4>
- Swanville
(17 miles [27.4 km] to the west)
- Saint Joseph
(18 miles [29 km] to the south)
- Albany
(19 miles [30.6 km] to the southwest)
- Saint Cloud
(19 miles [30.6 km] to the south)
- Burtrum
(19 miles [30.6 km] to the west)
- Parent
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Parent have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parent
- Parent is located in Benton County
- Randall
(20 miles [32.2 km] to the northwest)
- Pillsbury
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Pillsbury. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pillsbury
- Pillsbury is located in Todd County
- Google driving directions:
- From your current location to Pillsbury
- From Royalton to Pillsbury
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Royalton. If you can help, please contact us through our Feedback Page.
The official website for Morrison County: www.co.morrison.mn.us/
The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Royalton, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |