|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Kimball in the Atlas, the following communities of the 1890's would have been found near the current location of Kimball. The following communities are listed based on their distance, with the one closest to Kimball listed first.
- Kimball Prairie
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Kimball Prairie came from an uncertain source and they still need to be verified:<2>
- Jump to our Gazetteer entry for Kimball Prairie
- Kimball Prairie is located in Stearns County
- South Haven
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for South Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Haven
- South Haven is located in Wright County
- Population from the 2020 Census: 189 people
- Jump to TripAdvisor's Tourism page for South Haven <4>
- Fairhaven
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Fairhaven
- Fairhaven is located in Stearns County
- Watkins
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watkins
- Watkins is located in Meeker County
- Population from the 2020 Census: 958 people
- Jump to TripAdvisor's Tourism page for Watkins <4>
- Kingston
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Meeker County
- Population from the 2020 Census: 162 people
- Saint Nicholas
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Nicholas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Nicholas
- Saint Nicholas is located in Stearns County
- Annandale
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Annandale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annandale
- Annandale is located in Wright County
- Population from the 2020 Census: 3,546 people
- Jump to TripAdvisor's Tourism page for Annandale <4>
- Luxemburg
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Luxemburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luxemburg
- Luxemburg is located in Stearns County
- Rockville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Stearns County
- Population from the 2020 Census: 2,599 people
- Jump to TripAdvisor's Tourism page for Rockville <4>
- Forest City
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Meeker County
- Saint Augusta
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Saint Augusta. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saint Augusta
- Saint Augusta is located in Stearns County
- Population from the 2020 Census: 3,900 people
- Cold Spring
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Stearns County
- Population from the 2020 Census: 4,350 people
- Jump to TripAdvisor's Tourism page for Cold Spring <4>
- Eden Valley
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eden Valley
- Eden Valley is located in Meeker County
- Population from the 2020 Census: 1,038 people
- Jump to TripAdvisor's Tourism page for Eden Valley <4>
- Clearwater
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearwater
- Clearwater is located in Wright County
- Population from the 2020 Census: 1,841 people
- Jump to TripAdvisor's Tourism page for Clearwater <4>
- Richmond
(14 miles [22.5 km] to the northwest)
- Manannah
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Manannah. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Manannah
- Manannah is located in Meeker County
- Darwin
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darwin
- Darwin is located in Meeker County
- Population from the 2020 Census: 355 people
- Jump to TripAdvisor's Tourism page for Darwin <4>
- Dassel
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dassel
- Dassel is located in Meeker County
- Population from the 2020 Census: 1,472 people
- Jump to TripAdvisor's Tourism page for Dassel <4>
- Maple Lake
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Maple Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Lake
- Maple Lake is located in Wright County
- Population from the 2020 Census: 2,149 people
- Jump to TripAdvisor's Tourism page for Maple Lake <4>
- Silver Creek
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Silver Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Creek
- Silver Creek is located in Wright County
- Litchfield
(16 miles [25.7 km] to the southwest)
- Hasty
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Hasty
- Hasty is located in Wright County
- Cokato
(17 miles [27.4 km] to the south)
- Saint Joseph
(17 miles [27.4 km] to the north)
- Clear Lake
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Clear Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Lake
- Clear Lake is located in Sherburne County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Clear Lake <4>
- Cable
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cable. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Cable
- Cable is located in Sherburne County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Kimball. If you can help, please contact us through our Feedback Page. The official website for Stearns County: www.co.stearns.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kimball, please let us know so that we can improve our accuracy. |
<2> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|