RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Otter Tail County >> Erhard >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Minnesota


The Commemorative Quarter for Minnesota







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Erhard had a post office and railroad service. In 2020, Erhard had a population of 145 people.

The following communities are listed based on their distance from Erhard, with the one closest to Erhard listed first.

  • Edwards
    (5 miles [8 km] to the southeast)
    • Jump to our Gazetteer entry for Edwards
    • Edwards is located in Otter Tail County
  • Pelican Rapids
    (6 miles [9.7 km] to the north)
  • Elizabeth
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Elizabeth have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elizabeth
    • Elizabeth is located in Otter Tail County
    • Population from the 2020 Census: 170 people
    • Jump to TripAdvisor's Tourism page for Elizabeth <2>
  • Carlisle
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Carlisle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carlisle
    • Carlisle is located in Otter Tail County
  • Rothsay
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Rothsay have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rothsay
    • Rothsay is located in Otter Tail County
    • Population from the 2020 Census: 476 people
    • Jump to TripAdvisor's Tourism page for Rothsay <2>
  • Norwegian Grove
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Norwegian Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norwegian Grove
    • Norwegian Grove is located in Otter Tail County
  • Fergus Falls
    (13 miles [20.9 km] to the south)
  • Lawndale
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lawndale
    • Lawndale is located in Wilkin County
  • French
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for French have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for French
    • French is located in Otter Tail County
  • Wall Lake
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wall Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wall Lake
    • Wall Lake is located in Otter Tail County
  • Phelps
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Phelps have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Phelps
    • Phelps is located in Otter Tail County
  • Maine
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Maine have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maine
    • Maine is located in Otter Tail County
  • Tansem
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Tansem have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tansem
    • Tansem is located in Clay County
  • Parkdale
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Parkdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parkdale
    • Parkdale is located in Otter Tail County
  • Underwood
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Underwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Underwood
    • Underwood is located in Otter Tail County
    • Population from the 2020 Census: 364 people
    • Jump to TripAdvisor's Tourism page for Underwood <2>
  • Amor
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Amor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Amor
    • Amor is located in Otter Tail County
  • Cormorant
    (17 miles [27.4 km] to the north)
    • Jump to our Gazetteer entry for Cormorant
    • Cormorant is located in Becker County
  • Rollag
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Rollag have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rollag
    • Rollag is located in Clay County
  • Bucks Mill
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bucks Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bucks Mill
    • Bucks Mill is located in Becker County
  • Barnesville
    (19 miles [30.6 km] to the northwest)
  • Everdell
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Everdell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Everdell
    • Everdell is located in Wilkin County
  • Battle Lake
    (22 miles [35.4 km] to the southeast)
  • Western
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Western have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Western
    • Western is located in Otter Tail County
  • Dalton
    (23 miles [37 km] to the southeast)
  • Luce
    (24 miles [38.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Luce have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Luce
    • Luce is located in Otter Tail County

Unfortunately, we don't know of an official website for Erhard. If you can help, please contact us through our Feedback Page.

The official website for Otter Tail County: www.co.otter-tail.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Erhard, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024