RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Meeker County >> Cosmos >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Cosmos. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Cosmos.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Cosmos - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 29 communities listed:

  • Atwater
    (14 miles [22.5 km] to the north)
  • Bird Island
    (15 miles [24.1 km] to the southwest)
  • Brownton
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Brownton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brownton
    • Brownton is located in McLeod County
    • Population from the 2020 Census: 711 people
    • Jump to TripAdvisor's Tourism page for Brownton <2>
  • Buffalo Lake
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Buffalo Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo Lake
    • Buffalo Lake is located in Renville County
    • Population from the 2020 Census: 678 people
    • Jump to TripAdvisor's Tourism page for Buffalo Lake <2>
  • Cokato
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Cokato have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cokato
    • Cokato is located in Wright County
    • Population from the 2020 Census: 2,734 people
    • Jump to TripAdvisor's Tourism page for Cokato <2>
  • Danube
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Danube have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Danube
    • Danube is located in Renville County
    • Population from the 2020 Census: 451 people
    • Jump to TripAdvisor's Tourism page for Danube <2>
  • Darwin
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darwin
    • Darwin is located in Meeker County
    • Population from the 2020 Census: 355 people
    • Jump to TripAdvisor's Tourism page for Darwin <2>
  • Dassel
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dassel
    • Dassel is located in Meeker County
    • Population from the 2020 Census: 1,472 people
    • Jump to TripAdvisor's Tourism page for Dassel <2>
  • Eden Valley
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eden Valley
    • Eden Valley is located in Meeker County
    • Population from the 2020 Census: 1,038 people
    • Jump to TripAdvisor's Tourism page for Eden Valley <2>
  • Fairfax
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfax
    • Fairfax is located in Renville County
    • Population from the 2020 Census: 1,119 people
    • Jump to TripAdvisor's Tourism page for Fairfax <2>
  • Franklin
    (29 miles [46.7 km] to the south)
  • Gibbon
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Gibbon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibbon
    • Gibbon is located in Sibley County
    • Population from the 2020 Census: 740 people
    • Jump to TripAdvisor's Tourism page for Gibbon <2>
  • Glencoe
    (29 miles [46.7 km] to the east)
  • Grove City
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Grove City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grove City
    • Grove City is located in Meeker County
    • Population from the 2020 Census: 624 people
    • Jump to TripAdvisor's Tourism page for Grove City <2>
  • Hector
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hector
    • Hector is located in Renville County
    • Population from the 2020 Census: 1,041 people
    • Jump to TripAdvisor's Tourism page for Hector <2>
  • Hutchinson
    (16 miles [25.7 km] to the east)
  • Lake Lillian
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Lake Lillian have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Lillian
    • Lake Lillian is located in Kandiyohi County
    • Population from the 2020 Census: 233 people
    • Jump to TripAdvisor's Tourism page for Lake Lillian <2>
  • Litchfield
    (15 miles [24.1 km] to the northeast)
  • Morton
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Morton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morton
    • Morton is located in Renville County
    • Population from the 2020 Census: 369 people
    • Jump to TripAdvisor's Tourism page for Morton <2>
  • New Auburn
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Auburn have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Auburn
    • New Auburn is located in Sibley County
    • Population from the 2020 Census: 427 people
    • Jump to TripAdvisor's Tourism page for New Auburn <2>
  • New London
    (28 miles [45.1 km] to the northwest)
  • Olivia
    (18 miles [29 km] to the southwest)
  • Paynesville
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Paynesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Paynesville
    • Paynesville is located in Stearns County
    • Population from the 2020 Census: 2,531 people
    • Jump to TripAdvisor's Tourism page for Paynesville <2>
  • Raymond
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Raymond have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Raymond
    • Raymond is located in Kandiyohi County
    • Population from the 2020 Census: 759 people
    • Jump to TripAdvisor's Tourism page for Raymond <2>
  • Renville
    (27 miles [43.5 km] to the west)
  • Silver Lake
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silver Lake
    • Silver Lake is located in McLeod County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Silver Lake <2>
  • Spicer
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Spicer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spicer
    • Spicer is located in Kandiyohi County
    • Population from the 2020 Census: 1,224 people
    • Jump to TripAdvisor's Tourism page for Spicer <2>
  • Watkins
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Watkins
    • Watkins is located in Meeker County
    • Population from the 2020 Census: 958 people
    • Jump to TripAdvisor's Tourism page for Watkins <2>
  • Willmar
    (20 miles [32.2 km] to the northwest)

Unfortunately, we don't know of an official website for Cosmos. If you can help, please contact us through our Feedback Page.

The official website for Meeker County: www.co.meeker.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Cosmos) to Point B.Our distance measurements begin at a specific point in Cosmos. The point we use is located at these GPS coordinates - Latitude: 44.9354, Longitude: -94.6949       In this case, the coordinates for Cosmos have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024