|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Zion Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Zion Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Zion Cemetery. We've listed the following communities based on their distance, with the closest first.
- Renova ‑ Historic
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Renova
- Renova is located in Mower County
- Dexter
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Dexter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dexter
- Dexter is located in Mower County
- Population from the 2020 Census: 344 people
- Jump to TripAdvisor's Tourism page for Dexter <3>
- Sargeant
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Sargeant
- Sargeant is located in Mower County
- Population from the 2020 Census: 60 people
- Brownsdale
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Brownsdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brownsdale
- Brownsdale is located in Mower County
- Population from the 2020 Census: 696 people
- Jump to TripAdvisor's Tourism page for Brownsdale <3>
- Elkton
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Elkton
- Elkton is located in Mower County
- Population from the 2020 Census: 148 people
- Waltham
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Waltham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waltham
- Waltham is located in Mower County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Waltham <3>
- Grand Meadow
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Grand Meadow have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Meadow
- Grand Meadow is located in Mower County
- Population from the 2020 Census: 1,194 people
- Jump to TripAdvisor's Tourism page for Grand Meadow <3>
- Rock Dell
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rock Dell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rock Dell
- Rock Dell is located in Olmsted County
- Hayfield
(9 miles [14.5 km] to the northwest)
- Racine
(11 miles [17.7 km] to the east)
- Stewartville
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Stewartville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stewartville
- Stewartville is located in Olmsted County
- Population from the 2020 Census: 6,095 people
- Jump to TripAdvisor's Tourism page for Stewartville <3>
- Lansing
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lansing. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lansing
- Lansing is located in Mower County
- Rose Creek
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Rose Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rose Creek
- Rose Creek is located in Mower County
- Population from the 2020 Census: 423 people
- Jump to TripAdvisor's Tourism page for Rose Creek <3>
- Shanty Town
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Shanty Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shanty Town
- Shanty Town is located in Olmsted County
- Mapleview
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mapleview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mapleview
- Mapleview is located in Mower County
- Population from the 2020 Census: 177 people
- Austin
(15 miles [24.1 km] to the southwest)
- Adams
(15 miles [24.1 km] to the south)
- Taopi
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Taopi have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taopi
- Taopi is located in Mower County
- Population from the 2020 Census: 65 people
- Kasson
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Kasson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kasson
- Kasson is located in Dodge County
- Population from the 2020 Census: 6,530 people
- Jump to TripAdvisor's Tourism page for Kasson <3>
- Varco
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Varco
- Varco is located in Mower County
- Dodge Center
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Dodge Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dodge Center
- Dodge Center is located in Dodge County
- Population from the 2020 Census: 2,798 people
- Jump to TripAdvisor's Tourism page for Dodge Center <3>
- Spring Valley
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Valley
- Spring Valley is located in Fillmore County
- Population from the 2020 Census: 2,424 people
- Jump to TripAdvisor's Tourism page for Spring Valley <3>
- Simpson
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Olmsted County
- Byron
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Byron have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byron
- Byron is located in Olmsted County
- Population from the 2020 Census: 5,691 people
- Jump to TripAdvisor's Tourism page for Byron <3>
- Blooming Prairie
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Blooming Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blooming Prairie
- Blooming Prairie is located in Steele County
- Population from the 2020 Census: 1,927 people
- Jump to TripAdvisor's Tourism page for Blooming Prairie <3>
Off-the-Road Links ...
The official website for Mower County: www.co.mower.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Zion Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.7891, Longitude: -92.7163 In this case, the coordinates for the Zion Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|