|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Michael's Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Michael's Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Michael's Cemetery. We've listed the following communities based on their distance, with the closest first.
- Buckman
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Buckman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckman
- Buckman is located in Morrison County
- Population from the 2020 Census: 273 people
- Genola
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Genola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Genola
- Genola is located in Morrison County
- Population from the 2020 Census: 66 people
- Pierz
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Pierz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pierz
- Pierz is located in Morrison County
- Population from the 2020 Census: 1,364 people
- Jump to TripAdvisor's Tourism page for Pierz <3>
- Morrill
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Morrill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Morrill
- Morrill is located in Morrison County
- Ramey
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Ramey
- Ramey is located in Morrison County
- Lastrup
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Lastrup have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lastrup
- Lastrup is located in Morrison County
- Population from the 2020 Census: 98 people
- Jump to TripAdvisor's Tourism page for Lastrup <3>
- Royalton
(10 miles [16.1 km] to the southwest)
- Rice
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice
- Rice is located in Benton County
- Population from the 2020 Census: 1,401 people
- Jump to TripAdvisor's Tourism page for Rice <3>
- Hillman
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hillman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillman
- Hillman is located in Morrison County
- Population from the 2020 Census: 36 people
- Jump to TripAdvisor's Tourism page for Hillman <3>
- North Prairie
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for North Prairie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for North Prairie
- North Prairie is located in Morrison County
- Gilman
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilman
- Gilman is located in Benton County
- Population from the 2020 Census: 216 people
- Jump to TripAdvisor's Tourism page for Gilman <3>
- Little Falls
(14 miles [22.5 km] to the northwest)
- Bowlus
(15 miles [24.1 km] to the west)
- Watab
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Watab
- Watab is located in Benton County
- Harding
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Harding
- Harding is located in Morrison County
- Population from the 2020 Census: 122 people
- Belle Prairie
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Belle Prairie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Belle Prairie
- Belle Prairie is located in Morrison County
- Opole
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Opole. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Opole
- Opole is located in Stearns County
- Saint Stephen
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Stephen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Stephen
- Saint Stephen is located in Stearns County
- Population from the 2020 Census: 867 people
- Foley
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Foley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foley
- Foley is located in Benton County
- Population from the 2020 Census: 2,653 people
- Jump to TripAdvisor's Tourism page for Foley <3>
- Ronneby
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Ronneby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ronneby
- Ronneby is located in Benton County
- Sobieski
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Sobieski have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sobieski
- Sobieski is located in Morrison County
- Population from the 2020 Census: 194 people
- Elmdale
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Elmdale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elmdale
- Elmdale is located in Morrison County
- Population from the 2020 Census: 116 people
- Evergreen Village
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Stearns County
- Evergreen Village
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Benton County
- Oak Park
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Oak Park
- Oak Park is located in Benton County
Off-the-Road Links ...
The official website for Morrison County: www.co.morrison.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Michael's Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.8964, Longitude: -94.0931 In this case, the coordinates for the St. Michael's Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|