|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Kimball Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Kimball Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Kimball Cemetery. We've listed the following communities based on their distance, with the closest first.
- Kimball
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Kimball have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimball
- Kimball is located in Stearns County
- Population from the 2020 Census: 802 people
- Jump to TripAdvisor's Tourism page for Kimball <3>
- South Haven
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for South Haven have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Haven
- South Haven is located in Wright County
- Population from the 2020 Census: 189 people
- Jump to TripAdvisor's Tourism page for South Haven <3>
- Fairhaven
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Fairhaven
- Fairhaven is located in Stearns County
- Watkins
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watkins
- Watkins is located in Meeker County
- Population from the 2020 Census: 958 people
- Jump to TripAdvisor's Tourism page for Watkins <3>
- Kingston
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Meeker County
- Population from the 2020 Census: 162 people
- Annandale
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Annandale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annandale
- Annandale is located in Wright County
- Population from the 2020 Census: 3,546 people
- Jump to TripAdvisor's Tourism page for Annandale <3>
- Rockville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Stearns County
- Population from the 2020 Census: 2,599 people
- Jump to TripAdvisor's Tourism page for Rockville <3>
- Saint Augusta
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Saint Augusta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Saint Augusta
- Saint Augusta is located in Stearns County
- Population from the 2020 Census: 3,900 people
- Forest City
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Meeker County
- Cold Spring
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Stearns County
- Population from the 2020 Census: 4,350 people
- Jump to TripAdvisor's Tourism page for Cold Spring <3>
- Eden Valley
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eden Valley
- Eden Valley is located in Meeker County
- Population from the 2020 Census: 1,038 people
- Jump to TripAdvisor's Tourism page for Eden Valley <3>
- Pleasant Lake
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Pleasant Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Lake
- Pleasant Lake is located in Stearns County
- Richmond
(13 miles [20.9 km] to the northwest)
- Clearwater
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearwater
- Clearwater is located in Wright County
- Population from the 2020 Census: 1,841 people
- Jump to TripAdvisor's Tourism page for Clearwater <3>
- Manannah
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Manannah. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Manannah
- Manannah is located in Meeker County
- Albion Center
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Albion Center
- Albion Center is located in Wright County
- Maple Lake
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Maple Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Lake
- Maple Lake is located in Wright County
- Population from the 2020 Census: 2,149 people
- Jump to TripAdvisor's Tourism page for Maple Lake <3>
- Silver Creek
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Silver Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Creek
- Silver Creek is located in Wright County
- Darwin
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darwin
- Darwin is located in Meeker County
- Population from the 2020 Census: 355 people
- Jump to TripAdvisor's Tourism page for Darwin <3>
- Dassel
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dassel
- Dassel is located in Meeker County
- Population from the 2020 Census: 1,472 people
- Jump to TripAdvisor's Tourism page for Dassel <3>
- Albright
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Albright
- Albright is located in Wright County
- Hasty
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Hasty
- Hasty is located in Wright County
- Saint Joseph
(16 miles [25.7 km] to the north)
- Waite Park
(16 miles [25.7 km] to the north)
- Litchfield
(17 miles [27.4 km] to the southwest)
- Cokato
(17 miles [27.4 km] to the south)
- Clear Lake
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Clear Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Lake
- Clear Lake is located in Sherburne County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Clear Lake <3>
- Cable
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cable. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cable
- Cable is located in Sherburne County
- Saint Cloud
(17 miles [27.4 km] to the northeast)
- Roscoe
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Roscoe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Stearns County
- Population from the 2020 Census: 114 people
- Jump to TripAdvisor's Tourism page for Roscoe <3>
Off-the-Road Links ...
The official website for Stearns County: www.co.stearns.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Kimball Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.3202, Longitude: -94.3055 In this case, the coordinates for the Kimball Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|