RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maryland >> Harford County >> Wilson Mill >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Maryland

The Commemorative Quarter for Maryland





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Wilson Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Wilson Mill. The following communities are listed based on their distance, with the one closest to Wilson Mill listed first.

  • Glenville
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Glenville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenville
    • Glenville is located in Harford County
  • Darlington
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Darlington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darlington
    • Darlington is located in Harford County
    • Jump to TripAdvisor's Tourism page for Darlington <3>
  • Level
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Level have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Level
    • Level is located in Harford County
  • Garland
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Garland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Garland
    • Garland is located in Harford County
  • Stafford ‑ Historic
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Stafford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stafford
    • Stafford is located in Harford County
  • Webster
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Webster have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Webster
    • Webster is located in Harford County
  • Thomas Run
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Thomas Run have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thomas Run
    • Thomas Run is located in Harford County
  • Churchville
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Churchville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Churchville
    • Churchville is located in Harford County
    • Jump to TripAdvisor's Tourism page for Churchville <3>
  • Carsins Run
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Carsins Run have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carsins Run
    • Carsins Run is located in Harford County
  • Lapidum
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Lapidum have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lapidum
    • Lapidum is located in Harford County
  • Rock Run
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Rock Run
    • Rock Run is located in Cecil County
  • Rowlandsville
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rowlandsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rowlandsville
    • Rowlandsville is located in Cecil County
  • Conowingo
    (4 miles [6.4 km] to the northeast)
  • Dublin
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dublin
    • Dublin is located in Harford County
  • Castleton
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Castleton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Castleton
    • Castleton is located in Harford County
  • Flintville ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Flintville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flintville
    • Flintville is located in Harford County
  • Port Deposit
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Port Deposit have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Port Deposit
    • Port Deposit is located in Cecil County
    • Population from the 2020 Census: 766 people
    • Jump to TripAdvisor's Tourism page for Port Deposit <3>
  • Liberty Grove
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Liberty Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Grove
    • Liberty Grove is located in Cecil County
  • Oakwood
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for Oakwood
    • Oakwood is located in Cecil County
  • Bald Friar ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Bald Friar have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bald Friar
    • Bald Friar is located in Cecil County
  • Scarboro
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Scarboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Scarboro
    • Scarboro is located in Harford County
  • Allibone ‑ Historic
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Allibone have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allibone
    • Allibone is located in Harford County
  • Kalmia
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Kalmia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kalmia
    • Kalmia is located in Harford County
  • Calvary
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Calvary
    • Calvary is located in Harford County
  • Havre de Grace
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Havre de Grace have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Havre de Grace
    • Havre de Grace is located in Harford County
    • Population from the 2020 Census: 14,147 people
    • Jump to TripAdvisor's Tourism page for Havre de Grace <3>
  • Woodlawn
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodlawn
    • Woodlawn is located in Cecil County
  • Colora
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Colora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colora
    • Colora is located in Cecil County
    • Jump to TripAdvisor's Tourism page for Colora <3>
  • Macton
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Macton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Macton
    • Macton is located in Harford County

The official website for Harford County: www.co.ha.md.us/

The official website for State of Maryland: www.maryland.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wilson Mill, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024