Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Savage had a population of 657 people in 1895 with railroad service and no post office.
The following communities are listed based on their distance from Savage, with the one closest to Savage listed first.
- Guilford
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Guilford. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Guilford
- Guilford is located in Howard County
- Google driving directions:
- From your current location to Guilford
- From Savage to Guilford
- Annapolis Junction
(2 miles [3.2 km] to the southeast)
- Jessup
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Jessup have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessup
- Jessup is located in Anne Arundel County
- Jump to TripAdvisor's Tourism page for Jessup <3>
- Laurel
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Laurel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel
- Laurel is located in Prince George's County
- Population from the 2020 Census: 25,548 people
- Jump to TripAdvisor's Tourism page for Laurel <3>
- Mistletoe Springs
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Mistletoe Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mistletoe Springs
- Mistletoe Springs is located in Prince George's County
- Contee
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Contee have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Contee
- Contee is located in Prince George's County
- Simpsonville
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Simpsonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpsonville
- Simpsonville is located in Howard County
- Oakland Mills
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Oakland Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland Mills
- Oakland Mills is located in Howard County
- Dorsey
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Dorsey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dorsey
- Dorsey is located in Anne Arundel County
- Fulton
(5 miles [8 km] to the west)
- Burtonsville
(6 miles [9.7 km] to the west)
- Muirkirk
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Muirkirk have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Muirkirk
- Muirkirk is located in Prince George's County
- Severn
(6 miles [9.7 km] to the east)
- Harmans
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Harmans have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmans
- Harmans is located in Anne Arundel County
- Hanover
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanover
- Hanover is located in Howard County
- Jump to TripAdvisor's Tourism page for Hanover <3>
- Ammendale
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Ammendale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ammendale
- Ammendale is located in Prince George's County
- Patuxent
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Patuxent have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patuxent
- Patuxent is located in Anne Arundel County
- Odenton
(7 miles [11.3 km] to the southeast)
- Elkridge
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Elkridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elkridge
- Elkridge is located in Howard County
- Jump to TripAdvisor's Tourism page for Elkridge <3>
- Highland
(7 miles [11.3 km] to the west)
- Columbia
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Columbia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia
- Columbia is located in Howard County
- Jump to TripAdvisor's Tourism page for Columbia <3>
- Spencerville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Spencerville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spencerville
- Spencerville is located in Montgomery County
- Fairland
(8 miles [12.9 km] to the southwest)
- Beltsville
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Beltsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beltsville
- Beltsville is located in Prince George's County
- Jump to TripAdvisor's Tourism page for Beltsville <3>
- Wellham Crossroads ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Wellham Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wellham Crossroads
- Wellham Crossroads is located in Anne Arundel County
- Patapsco
(8 miles [12.9 km] to the northeast)
- Saint Denis
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Denis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Denis
- Saint Denis is located in Baltimore County
- Ilchester
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Ilchester have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ilchester
- Ilchester is located in Howard County
- Clarksville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Howard County
- Jump to TripAdvisor's Tourism page for Clarksville <3>
Off-the-Road Links ...
The official website for Howard County: www.co.ho.md.us/
The official website for State of Maryland: https://www.maryland.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Savage, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |