Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Mill Run in the Atlas, the following communities of the 1890's would have been found near the current location of Mill Run. The following communities are listed based on their distance, with the one closest to Mill Run listed first.
- Cordova
(2 miles [3.2 km] to the southwest)- Jump to our Gazetteer entry for Cordova
- Cordova is located in Talbot County
- Jump to TripAdvisor's Tourism page for Cordova <2>
- Queen Anne
(2 miles [3.2 km] to the north)- Note: The GPS coordinates that we are using for Queen Anne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queen Anne
- Queen Anne is located in Queen Anne's County
- Population from the 2020 Census: 211 people
- Jump to TripAdvisor's Tourism page for Queen Anne <2>
- Griffin
(3 miles [4.8 km] to the southeast) - Willoughby
(4 miles [6.4 km] to the northwest)- Note: The GPS coordinates that we are using for Willoughby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willoughby
- Willoughby is located in Queen Anne's County
- Matthews
(5 miles [8 km] to the south) - Skipton
(5 miles [8 km] to the west) - Longwoods
(6 miles [9.7 km] to the west) - Starr
(6 miles [9.7 km] to the northwest) - Ridgely
(6 miles [9.7 km] to the northeast) - Williston
(7 miles [11.3 km] to the southeast) - Denton
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denton
- Denton is located in Caroline County
- Population from the 2020 Census: 4,538 people
- Jump to TripAdvisor's Tourism page for Denton <2>
- Ruthsburg
(7 miles [11.3 km] to the north) - Wye Mills
(7 miles [11.3 km] to the northwest)- Jump to our Gazetteer entry for Wye Mills
- Wye Mills is located in Talbot County
- Jump to TripAdvisor's Tourism page for Wye Mills <2>
- Easton
(9 miles [14.5 km] to the southwest)- Note: The GPS coordinates that we are using for Easton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Easton
- Easton is located in Talbot County
- Population from the 2020 Census: 16,611 people
- Jump to TripAdvisor's Tourism page for Easton <2>
- Bethlehem
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Caroline County
- Hobbs
(9 miles [14.5 km] to the east) - Anthony
(9 miles [14.5 km] to the east) - Carmichael
(9 miles [14.5 km] to the west)- Note: The GPS coordinates that we are using for Carmichael have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carmichael
- Carmichael is located in Queen Anne's County
- Bloomfield
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Bloomfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomfield
- Bloomfield is located in Talbot County
- Grove
(10 miles [16.1 km] to the southeast) - Andersontown
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for Andersontown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Andersontown
- Andersontown is located in Caroline County
- Hope
(10 miles [16.1 km] to the north) - Greensboro
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Greensboro
- Greensboro is located in Caroline County
- Population from the 2020 Census: 1,878 people
- Jump to TripAdvisor's Tourism page for Greensboro <2>
- Tunis Mills
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Tunis Mills
- Tunis Mills is located in Talbot County
- Carville
(11 miles [17.7 km] to the north) - American Corner
(11 miles [17.7 km] to the southeast)- Note: The GPS coordinates that we are using for American Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for American Corner
- American Corner is located in Caroline County
- Concord
(11 miles [17.7 km] to the southeast) - Centreville
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Centreville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centreville
- Centreville is located in Queen Anne's County
- Population from the 2020 Census: 4,949 people
- Jump to TripAdvisor's Tourism page for Centreville <2>
- Bridgetown
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Bridgetown
- Bridgetown is located in Caroline County
- Guys
(11 miles [17.7 km] to the west)
Off-the-Road Links ...
The official website for Talbot County: www.co.talbot.md.us/
The official website for State of Maryland: www.maryland.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mill Run, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |