Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Glenbauer in the Atlas, the following communities of the 1890's would have been found near the current location of Glenbauer. The following communities are listed based on their distance, with the one closest to Glenbauer listed first.
- Jerusalem Mills
(Less than 2 miles to the southeast)
- Jerusalem Mills is located in Baltimore County
- Jump to our Gazetteer entry for Jerusalem Mills
- Kingsville
(Less than 2 miles to the southwest)
- Upper Falls
(Less than 2 miles to the south)
- Upper Falls is located in Baltimore County
- Jump to our Gazetteer entry for Upper Falls
- Franklinville
(Less than 2 miles to the southeast)
- Franklinville is located in Baltimore County
- Jump to our Gazetteer entry for Franklinville
- Reckford
(Less than 2 miles to the northwest)
- Reckford is located in Baltimore County
- Jump to our Gazetteer entry for Reckford
- Bradshaw
(2 miles [3.2 km] to the southeast)
- Clayton
(2 miles [3.2 km] to the east)
- Clayton is located in Harford County
- Jump to our Gazetteer entry for Clayton
- Wilna
(2 miles [3.2 km] to the northeast)
- Wilna is located in Harford County
- Jump to our Gazetteer entry for Wilna
- Fork
(2 miles [3.2 km] to the west)
- Gunpowder
(3 miles [4.8 km] to the south)
- Gunpowder is located in Baltimore County
- Jump to our Gazetteer entry for Gunpowder
- Joppa
(3 miles [4.8 km] to the southeast)
- Singer
(3 miles [4.8 km] to the east)
- Singer is located in Harford County
- Jump to our Gazetteer entry for Singer
- Wimbledon
(3 miles [4.8 km] to the north)
- Wimbledon is located in Harford County
- Jump to our Gazetteer entry for Wimbledon
- Benson
(3 miles [4.8 km] to the north)
- Benson is located in Harford County
- Jump to our Gazetteer entry for Benson
- Fallston
(3 miles [4.8 km] to the north)
- Perry Hall
(4 miles [6.4 km] to the southwest)
- Emmorton
(4 miles [6.4 km] to the northeast)
- Emmorton is located in Harford County
- Jump to our Gazetteer entry for Emmorton
- Watervale
(4 miles [6.4 km] to the north)
- Watervale is located in Harford County
- Jump to our Gazetteer entry for Watervale
- Baldwin
(4 miles [6.4 km] to the northwest)
- Gittings
(4 miles [6.4 km] to the west)
- Gittings is located in Baltimore County
- Jump to our Gazetteer entry for Gittings
- Glen Arm
(4 miles [6.4 km] to the west)
- Notch Cliff
(5 miles [8 km] to the west)
- Notch Cliff is located in Baltimore County
- Jump to our Gazetteer entry for Notch Cliff
- White Marsh
(5 miles [8 km] to the south)
- Magnolia
(5 miles [8 km] to the southeast)
- Magnolia is located in Harford County
- Jump to our Gazetteer entry for Magnolia
- Van Bibber
(5 miles [8 km] to the east)
- Van Bibber is located in Harford County
- Jump to our Gazetteer entry for Van Bibber
- Bel Air
(5 miles [8 km] to the northeast)
- Bel Air is located in Harford County
- Jump to our Gazetteer entry for Bel Air
- Population from the 2020 Census: 10,266 people
- Former names for Bel Air:
- Belle Air
- Belle Aire
- Jump to TripAdvisor's Tourism page for Bel Air <2>
- Vale
(5 miles [8 km] to the north)
- Vale is located in Harford County
- Jump to our Gazetteer entry for Vale
- Hydes
(5 miles [8 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glenbauer, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |