|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. James Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. James Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. James Cemetery. We've listed the following communities based on their distance, with the closest first.
- Worton
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Worton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Worton
- Worton is located in Kent County
- Jump to TripAdvisor's Tourism page for Worton <3>
- Lynch
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Lynch
- Lynch is located in Kent County
- Chestertown
(5 miles [8 km] to the southeast)
- Morganec Village
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Morganec Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morganec Village
- Morganec Village is located in Kent County
- Coleman
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Coleman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Coleman
- Coleman is located in Kent County
- Kingstown
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Kingstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingstown
- Kingstown is located in Queen Anne's County
- Kings Town Manor
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Kings Town Manor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Town Manor
- Kings Town Manor is located in Queen Anne's County
- Mile Tree Village
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Mile Tree Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mile Tree Village
- Mile Tree Village is located in Kent County
- Still Pond
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Still Pond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Still Pond
- Still Pond is located in Kent County
- Betterton
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Betterton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Betterton
- Betterton is located in Kent County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Betterton <3>
- Kennedyville
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Kennedyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kennedyville
- Kennedyville is located in Kent County
- Jump to TripAdvisor's Tourism page for Kennedyville <3>
- Pomona
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Pomona
- Pomona is located in Kent County
- Edesville
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Edesville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edesville
- Edesville is located in Kent County
- Old Town
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Town
- Old Town is located in Kent County
- Michaelsville
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Michaelsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Michaelsville
- Michaelsville is located in Harford County
- Locust Grove
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Locust Grove. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Locust Grove
- Locust Grove is located in Kent County
- Rock Hall
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Rock Hall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Hall
- Rock Hall is located in Kent County
- Population from the 2020 Census: 1,255 people
- Jump to TripAdvisor's Tourism page for Rock Hall <3>
- Cliffs City
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Cliffs City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cliffs City
- Cliffs City is located in Kent County
- Indian Town
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Indian Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Town
- Indian Town is located in Queen Anne's County
- Crumpton
(11 miles [17.7 km] to the east)
- The Village at Church Hill Crossing
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for The Village at Church Hill Crossing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Village at Church Hill Crossing
- The Village at Church Hill Crossing is located in Queen Anne's County
- Church Hill
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church Hill
- Church Hill is located in Queen Anne's County
- Population from the 2020 Census: 755 people
- Jump to TripAdvisor's Tourism page for Church Hill <3>
- Edgewood
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewood
- Edgewood is located in Harford County
- Jump to TripAdvisor's Tourism page for Edgewood <3>
- Perryman
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Perryman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Perryman
- Perryman is located in Harford County
- Lambson
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lambson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lambson
- Lambson is located in Kent County
- Aberdeen Proving Ground
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Aberdeen Proving Ground. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Aberdeen Proving Ground
- Aberdeen Proving Ground is located in Harford County
- Edgewater Village
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Edgewater Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewater Village
- Edgewater Village is located in Harford County
- Harewood Park
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Harewood Park
- Harewood Park is located in Baltimore County
- Chase
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Chase. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Chase
- Chase is located in Baltimore County
- Dundee Village
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Dundee Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dundee Village
- Dundee Village is located in Baltimore County
- Biscayne Bay Village
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Biscayne Bay Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Biscayne Bay Village
- Biscayne Bay Village is located in Baltimore County
Off-the-Road Links ...
The official website for Kent County: www.kentcounty.com/ The official website for State of Maryland: https://www.maryland.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. James Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.2793, Longitude: -76.1380 In this case, the coordinates for the St. James Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|