|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Carmel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Carmel Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Mt. Carmel Cemetery (FG ID #1969632). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Mt. Carmel Cemetery. We've listed the following communities based on their distance, with the closest first.
- Country Village
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Country Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Village
- Country Village is located in Harford County
- Creswell
(2 miles [3.2 km] to the east)
- Bradford Village
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Bradford Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradford Village
- Bradford Village is located in Harford County
- Homestead Village
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Homestead Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homestead Village
- Homestead Village is located in Harford County
- Pleasant Hills
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Pleasant Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hills
- Pleasant Hills is located in Harford County
- Mountain
(3 miles [4.8 km] to the southwest)
- Joppatowne
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Joppatowne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joppatowne
- Joppatowne is located in Harford County
- Van Bibber
(3 miles [4.8 km] to the south)
- Abingdon
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Abingdon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Abingdon
- Abingdon is located in Harford County
- Jump to TripAdvisor's Tourism page for Abingdon <5>
- Bel Air
(3 miles [4.8 km] to the northwest)
- Harford Furnace
(3 miles [4.8 km] to the east)
- Benson
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Benson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Benson
- Benson is located in Harford County
- Google driving directions:
- From your current location to Benson
- From the Mt. Carmel Cemetery to Benson
- Lynchs Corner
(3 miles [4.8 km] to the west)
- Jerusalem Mills
(4 miles [6.4 km] to the southwest)
- Franklinville
(4 miles [6.4 km] to the southwest)
- Joppa
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Joppa have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joppa
- Joppa is located in Harford County
- Jump to TripAdvisor's Tourism page for Joppa <5>
- Edgewater Village
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Edgewater Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewater Village
- Edgewater Village is located in Harford County
- Belcamp
(4 miles [6.4 km] to the east)
- Riverside
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Harford County
- Riverside Village of Church Creek
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Riverside Village of Church Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside Village of Church Creek
- Riverside Village of Church Creek is located in Harford County
- Fallston
(4 miles [6.4 km] to the west)
- Wimbledon
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Wimbledon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wimbledon
- Wimbledon is located in Harford County
- Kingsville
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Kingsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsville
- Kingsville is located in Baltimore County
- Jump to TripAdvisor's Tourism page for Kingsville <5>
- Upper Falls
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Upper Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upper Falls
- Upper Falls is located in Baltimore County
- Bradshaw
(5 miles [8 km] to the southwest)
- Edgewood
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewood
- Edgewood is located in Harford County
- Jump to TripAdvisor's Tourism page for Edgewood <5>
- Bynum
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Bynum. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bynum
- Bynum is located in Harford County
- Google driving directions:
- From your current location to Bynum
- From the Mt. Carmel Cemetery to Bynum
- Harford Village
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Harford Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harford Village
- Harford Village is located in Harford County
- Amoss
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Amoss. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Amoss
- Amoss is located in Harford County
- Google driving directions:
- From your current location to Amoss
- From the Mt. Carmel Cemetery to Amoss
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Carmel Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.4937, Longitude: -76.3226 |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|