Welcome to Belmont ...
Belmont is located in Baltimore County<1>.
Belmont is 460 feet [140 m] above sea level.<2>.
Time Zone: Belmont lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Belmont: 410, 443 & 667<3>
Communities Also Named Belmont ...
Using our Gazetteer, we found that there are two Maryland communities named Belmont: This one is located in Baltimore County and the other is located in Wicomico County.
Beyond Maryland, there are 88 communities that are also named Belmont - they are located in Alabama (2), Arkansas, California, Colorado, Florida (3), Georgia (4), Idaho, Illinois (3), Indiana (3), Kansas (6), Kentucky (3), Louisiana (3), Maine, Manitoba, Massachusetts, Michigan, Mississippi (2), Missouri, Montana (2), Nebraska (2), Nevada, New Brunswick, New Hampshire, New Jersey, New York (2), North Carolina (6), Nova Scotia (2), Ohio (4), Ontario, Pennsylvania (3), Prince Edward Island, South Carolina (3), Tennessee (6), Texas, Vermont, Virginia (8), Washington, West Virginia and Wisconsin.
For more information, see our Tidbits & Trivia Page for Belmont.
Websites for Belmont ...
Chamber of Commerce: www.baltcountycc.com/
Although we don't have any websites that are specific to Belmont, the following might be of interest:
Communities near Belmont ...
We have created a list of 10 communities that are near Belmont.
- Baltimore
(7 miles [11.3 km] to the east)
- Laurel
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Laurel have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel
- Laurel is located in Prince George's County
- Population from the 2020 Census: 25,548 people
- Jump to TripAdvisor's Tourism page for Laurel <4>
- Sykesville
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Sykesville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sykesville
- Sykesville is located in Carroll County
- Population from the 2020 Census: 3,973 people
- Jump to TripAdvisor's Tourism page for Sykesville <4>
- Brookeville
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Brookeville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookeville
- Brookeville is located in Montgomery County
- Population from the 2020 Census: 144 people
- Jump to TripAdvisor's Tourism page for Brookeville <4>
- Arbutus
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Arbutus have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arbutus
- Arbutus is located in Baltimore County
- Jump to TripAdvisor's Tourism page for Arbutus <4>
- Carriage Hill Village
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Carriage Hill Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carriage Hill Village
- Carriage Hill Village is located in Baltimore County
- Colonial Village
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Baltimore City
- Howardsville
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Howardsville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howardsville
- Howardsville is located in Baltimore County
- Marydell
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Marydell. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Marydell
- Marydell is located in Howard County
- Oaklee Village
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Oaklee Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oaklee Village
- Oaklee Village is located in Baltimore City
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Belmont. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Belmont.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Belmont. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Belmont.
We also have a detailed list of newspapers that have been published in the area around Belmont. See our Newspapers Page for Belmont.
TripAdvisor Tourism Pages for Belmont ...
Looking for more information about Belmont? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Belmont, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Belmont.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Belmont. If you can help, please contact us through our Feedback Page.
The official website for Baltimore County: www.co.ba.md.us/
The official website for State of Maryland: https://www.maryland.gov/
Footnotes ...
<1> | If you're interested in how the shape of Maryland's counties, including Baltimore, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<2> | The elevation is an estimate for the area around Belmont - it will be higher in some places and lower in others. |
<3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 410 code has been Overlayed with one of the following codes: 443 or 667. New phone numbers in the Belmont area will be assigned with one of these codes: 410, 443 or 667. As a result, placing a call in the Belmont area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<6> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |