Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Ashby Place in the Atlas, the following communities of the 1890's would have been found near the current location of Ashby Place. The following communities are listed based on their distance, with the one closest to Ashby Place listed first.
- Magnolia
(Less than 2 miles to the south)
- Magnolia is located in Harford County
- Jump to our Gazetteer entry for Magnolia
- Edgewood
(Less than 2 miles to the southeast)
- Van Bibber
(Less than 2 miles to the north)
- Van Bibber is located in Harford County
- Jump to our Gazetteer entry for Van Bibber
- Clayton
(2 miles [3.2 km] to the northwest)
- Clayton is located in Harford County
- Jump to our Gazetteer entry for Clayton
- Joppa
(2 miles [3.2 km] to the west)
- Gunpowder
(3 miles [4.8 km] to the west)
- Gunpowder is located in Baltimore County
- Jump to our Gazetteer entry for Gunpowder
- Singer
(3 miles [4.8 km] to the north)
- Singer is located in Harford County
- Jump to our Gazetteer entry for Singer
- Abingdon
(3 miles [4.8 km] to the northeast)
- Bradshaw
(3 miles [4.8 km] to the west)
- Harewood Park
(4 miles [6.4 km] to the southwest)
- Harewood Park is located in Baltimore County
- Jump to our Gazetteer entry for Harewood Park
- Bush River
(4 miles [6.4 km] to the east)
- Bush River is located in Harford County
- Jump to our Gazetteer entry for Bush River
- Belcamp
(4 miles [6.4 km] to the northeast)
- Emmorton
(4 miles [6.4 km] to the north)
- Emmorton is located in Harford County
- Jump to our Gazetteer entry for Emmorton
- Franklinville
(4 miles [6.4 km] to the west)
- Franklinville is located in Baltimore County
- Jump to our Gazetteer entry for Franklinville
- Upper Falls
(4 miles [6.4 km] to the west)
- Upper Falls is located in Baltimore County
- Jump to our Gazetteer entry for Upper Falls
- Chase
(5 miles [8 km] to the southwest)
- Chase is located in Baltimore County
- Jump to our Gazetteer entry for Chase
- Harford Furnace
(5 miles [8 km] to the northeast)
- Harford Furnace is located in Harford County
- Jump to our Gazetteer entry for Harford Furnace
- Wilna
(5 miles [8 km] to the northwest)
- Wilna is located in Harford County
- Jump to our Gazetteer entry for Wilna
- Jerusalem Mills
(5 miles [8 km] to the northwest)
- Jerusalem Mills is located in Baltimore County
- Jump to our Gazetteer entry for Jerusalem Mills
- Kingsville
(5 miles [8 km] to the west)
- White Marsh
(6 miles [9.7 km] to the southwest)
- Perryman
(6 miles [9.7 km] to the northeast)
- Perryman is located in Harford County
- Jump to our Gazetteer entry for Perryman
- Creswell
(6 miles [9.7 km] to the north)
- Creswell is located in Harford County
- Jump to our Gazetteer entry for Creswell
- Benson
(6 miles [9.7 km] to the northwest)
- Benson is located in Harford County
- Jump to our Gazetteer entry for Benson
- Bel Air
(7 miles [11.3 km] to the north)
- Bel Air is located in Harford County
- Jump to our Gazetteer entry for Bel Air
- Population from the 2020 Census: 10,266 people
- Former names for Bel Air:
- Belle Air
- Belle Aire
- Jump to TripAdvisor's Tourism page for Bel Air <2>
- Watervale
(7 miles [11.3 km] to the northwest)
- Watervale is located in Harford County
- Jump to our Gazetteer entry for Watervale
- Michaelsville
(7 miles [11.3 km] to the east)
- Michaelsville is located in Harford County
- Jump to our Gazetteer entry for Michaelsville
- Fallston
(7 miles [11.3 km] to the northwest)
- Wimbledon
(7 miles [11.3 km] to the northwest)
- Wimbledon is located in Harford County
- Jump to our Gazetteer entry for Wimbledon
- Reckford
(7 miles [11.3 km] to the northwest)
- Reckford is located in Baltimore County
- Jump to our Gazetteer entry for Reckford
- Fork
(7 miles [11.3 km] to the northwest)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ashby Place, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |