RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Larue County >> Tanner >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Tanner in the Atlas, the following communities of the 1890's would have been found near the current location of Tanner. The following communities are listed based on their distance, with the one closest to Tanner listed first.

  • Buffalo
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo
    • Buffalo is located in Larue County
  • Hodgenville
    (4 miles [6.4 km] to the northeast)
  • Magnolia
    (5 miles [8 km] to the southeast)
    • Jump to our Gazetteer entry for Magnolia
    • Magnolia is located in Larue County
  • Upton
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Upton
    • Upton is located in Hardin County
    • Population from the 2020 Census: 691 people
    • Jump to TripAdvisor's Tourism page for Upton <3>
  • Hammonville
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Hammonville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hammonville
    • Hammonville is located in Hart County
  • Tonieville
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Tonieville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tonieville
    • Tonieville is located in Larue County
  • Sonora
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sonora
    • Sonora is located in Hardin County
    • Population from the 2020 Census: 523 people
    • Jump to TripAdvisor's Tourism page for Sonora <3>
  • Mount Sherman
    (7 miles [11.3 km] to the southeast)
    • Jump to our Gazetteer entry for Mount Sherman
    • Mount Sherman is located in Larue County
  • Nolin
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Nolin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nolin
    • Nolin is located in Hardin County
  • Pike View
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Pike View have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pike View
    • Pike View is located in Hart County
  • Glendale
    (9 miles [14.5 km] to the northwest)
  • Bonnieville
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bonnieville
    • Bonnieville is located in Hart County
    • Population from the 2020 Census: 260 people
    • Jump to TripAdvisor's Tourism page for Bonnieville <3>
  • Linwood
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Linwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Linwood
    • Linwood is located in Hart County
  • Powder Mill
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Powder Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Powder Mill
    • Powder Mill is located in Hart County
  • Melrose
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Melrose have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Melrose
    • Melrose is located in Hardin County
  • Hudgins
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hudgins have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hudgins
    • Hudgins is located in Green County
  • Roanoke
    (12 miles [19.3 km] to the north)
    • Jump to our Gazetteer entry for Roanoke
    • Roanoke is located in Larue County
  • Hinesdale
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Hinesdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hinesdale
    • Hinesdale is located in Hart County
  • Rio
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Rio have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rio
    • Rio is located in Hart County
  • Lobb
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lobb have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lobb
    • Lobb is located in Green County
  • White Mills
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for White Mills
    • White Mills is located in Hardin County
  • Priceville
    (14 miles [22.5 km] to the southwest)
    • Jump to our Gazetteer entry for Priceville
    • Priceville is located in Hart County
  • Elizabethtown
    (14 miles [22.5 km] to the north)
  • Allendale
    (14 miles [22.5 km] to the southeast)
    • Jump to our Gazetteer entry for Allendale
    • Allendale is located in Green County
  • Gleanings
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Gleanings have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gleanings
    • Gleanings is located in Larue County
  • New Haven
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Haven
    • New Haven is located in Nelson County
    • Population from the 2020 Census: 900 people
    • Jump to TripAdvisor's Tourism page for New Haven <3>
  • Cecilia
    (14 miles [22.5 km] to the northwest)

The official website for Larue County: www.laruecounty.net

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tanner, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024