Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Pueblo in the Atlas, the following communities of the 1890's would have been found near the current location of Pueblo. The following communities are listed based on their distance, with the one closest to Pueblo listed first.
- Gregory
(Less than 2 miles to the north) - Coopersville
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for Coopersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coopersville
- Coopersville is located in Wayne County
- Ritner
(4 miles [6.4 km] to the east)- Jump to our Gazetteer entry for Ritner
- Ritner is located in Wayne County
- Kidder
(7 miles [11.3 km] to the northeast) - Steubenville
(7 miles [11.3 km] to the northwest)- Note: The GPS coordinates that we are using for Steubenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steubenville
- Steubenville is located in Wayne County
- Monticello
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Monticello
- Monticello is located in Wayne County
- Population from the 2020 Census: 5,906 people
- Jump to TripAdvisor's Tourism page for Monticello <3>
- Sumpter
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Sumpter
- Sumpter is located in Wayne County
- Parmleysville
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Parmleysville
- Parmleysville is located in Wayne County
- Mill Springs
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Mill Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Springs
- Mill Springs is located in Wayne County
- Frazer
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Frazer
- Frazer is located in Wayne County
- Rankin
(10 miles [16.1 km] to the northwest) - Mount Pisgah
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Mount Pisgah
- Mount Pisgah is located in Wayne County
- Eadsville
(11 miles [17.7 km] to the northwest) - Shearer Valley
(12 miles [19.3 km] to the west)- Note: The GPS coordinates that we are using for Shearer Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shearer Valley
- Shearer Valley is located in Wayne County
- Sloans Valley
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Sloans Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sloans Valley
- Sloans Valley is located in Pulaski County
- Tateville
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Tateville
- Tateville is located in Pulaski County
- Burnside
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Burnside have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnside
- Burnside is located in Pulaski County
- Population from the 2020 Census: 791 people
- Jump to TripAdvisor's Tourism page for Burnside <3>
- Bronston
(13 miles [20.9 km] to the north)- Jump to our Gazetteer entry for Bronston
- Bronston is located in Pulaski County
- Jump to TripAdvisor's Tourism page for Bronston <3>
- Parnell
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Parnell
- Parnell is located in Wayne County
- Trimble
(14 miles [22.5 km] to the north) - Powersburg
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Powersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Powersburg
- Powersburg is located in Wayne County
- Cedar Grove
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Cedar Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Grove
- Cedar Grove is located in Pulaski County
- Jabez
(15 miles [24.1 km] to the northwest) - Gapcreek
(16 miles [25.7 km] to the west) - Cabell
(16 miles [25.7 km] to the west)
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pueblo, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |