Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Owingsville had a population of 763 people in 1895 with a post office and no railroad service. In 2020, Owingsville had a population of 1,564 people.
The following communities are listed based on their distance from Owingsville, with the one closest to Owingsville listed first.
- Preston
(4 miles [6.4 km] to the south)
- Olympia
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Olympia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olympia
- Olympia is located in Bath County
- Reynoldsville
(4 miles [6.4 km] to the northwest)
- Stepstone
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Stepstone have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stepstone
- Stepstone is located in Montgomery County
- Wyoming
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Wyoming. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wyoming
- Wyoming is located in Bath County
- Google driving directions:
- From your current location to Wyoming
- From Owingsville to Wyoming
- Howards Mill
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Howards Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howards Mill
- Howards Mill is located in Montgomery County
- Ewington
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Ewington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ewington
- Ewington is located in Montgomery County
- Hope
(8 miles [12.9 km] to the south)
- Salt Lick
(8 miles [12.9 km] to the east)
- Grange City
(8 miles [12.9 km] to the northeast)
- Bethel
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Bath County
- Sherburne
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Sherburne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherburne
- Sherburne is located in Fleming County
- Sharpsburg
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Sharpsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharpsburg
- Sharpsburg is located in Bath County
- Population from the 2020 Census: 338 people
- Midland
(10 miles [16.1 km] to the east)
- Sunset
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sunset. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sunset
- Sunset is located in Fleming County
- Google driving directions:
- From your current location to Sunset
- From Owingsville to Sunset
- Judy
(10 miles [16.1 km] to the west)
- Mount Sterling
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Mount Sterling have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Sterling
- Mount Sterling is located in Montgomery County
- Population from the 2020 Census: 7,246 people
- Jump to TripAdvisor's Tourism page for Mount Sterling <4>
- Farmers
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Farmers have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmers
- Farmers is located in Rowan County
- Hillsboro
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hillsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsboro
- Hillsboro is located in Fleming County
- Jump to TripAdvisor's Tourism page for Hillsboro <4>
- Camargo
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Camargo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camargo
- Camargo is located in Montgomery County
- Population from the 2020 Census: 1,151 people
- Jeffersonville
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Jeffersonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jeffersonville
- Jeffersonville is located in Montgomery County
- Population from the 2020 Census: 1,755 people
- Jump to TripAdvisor's Tourism page for Jeffersonville <4>
- Sprout
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Sprout have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sprout
- Sprout is located in Nicholas County
- Moorefield
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Moorefield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moorefield
- Moorefield is located in Nicholas County
- Cornwell
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Cornwell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornwell
- Cornwell is located in Menifee County
- Rothwell
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rothwell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rothwell
- Rothwell is located in Menifee County
- Google driving directions:
- From your current location to Rothwell
- From Owingsville to Rothwell
- Tilton
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Tilton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tilton
- Tilton is located in Fleming County
- Google driving directions:
- From your current location to Tilton
- From Owingsville to Tilton
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Owingsville. If you can help, please contact us through our Feedback Page.
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Owingsville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |