Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Milburn had a population of 297 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Milburn, with the one closest to Milburn listed first.
- Kirbyton
(3 miles [4.8 km] to the northeast)
- Spring Hill
(5 miles [8 km] to the southwest)
- Fancy Farm
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Fancy Farm have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fancy Farm
- Fancy Farm is located in Graves County
- Arlington
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arlington
- Arlington is located in Carlisle County
- Population from the 2020 Census: 296 people
- Dublin
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dublin
- Dublin is located in Graves County
- Cunningham
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Cunningham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cunningham
- Cunningham is located in Carlisle County
- Jump to TripAdvisor's Tourism page for Cunningham <4>
- Bardwell
(8 miles [12.9 km] to the northwest)
- Clinton
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Clinton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinton
- Clinton is located in Hickman County
- Population from the 2020 Census: 1,244 people
- Jump to TripAdvisor's Tourism page for Clinton <4>
- Blandville
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Blandville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blandville
- Blandville is located in Ballard County
- Population from the 2020 Census: 84 people
- Pottsville
(10 miles [16.1 km] to the northeast)
- Berkley
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Berkley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berkley
- Berkley is located in Carlisle County
- Columbus
(11 miles [17.7 km] to the west)
- South Columbus
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for South Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Columbus
- South Columbus is located in Hickman County
- Kansas
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Kansas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas
- Kansas is located in Graves County
- Pryorsburg
(12 miles [19.3 km] to the southeast)
- Lovelaceville
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Lovelaceville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lovelaceville
- Lovelaceville is located in Ballard County
- Laketon
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Laketon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laketon
- Laketon is located in Carlisle County
- Oakton
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Oakton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakton
- Oakton is located in Hickman County
- Folsomdale
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Folsomdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Folsomdale
- Folsomdale is located in Graves County
- Beelerton
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Beelerton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beelerton
- Beelerton is located in Hickman County
- Wingo
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Wingo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wingo
- Wingo is located in Graves County
- Population from the 2020 Census: 621 people
- Jump to TripAdvisor's Tourism page for Wingo <4>
- Hickory
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Hickory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory
- Hickory is located in Graves County
- Viola
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Graves County
- Melber
(14 miles [22.5 km] to the northeast)
- Moscow
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Moscow. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Moscow
- Moscow is located in Hickman County
- Google driving directions:
- From your current location to Moscow
- From Milburn to Moscow
- Crutchfield
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Crutchfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crutchfield
- Crutchfield is located in Fulton County
- Slater
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Slater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slater
- Slater is located in Ballard County
- Mayfield
(15 miles [24.1 km] to the east)
- Boaz
(15 miles [24.1 km] to the northeast)
- Wickliffe
(15 miles [24.1 km] to the northwest)
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Milburn, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |